GT 2020 Dyno Pro Compe Dave Voelker 29er Orange - Europe Exclusive at AlansBMX

They have finally arrived, and boy do they look goooood. The GT Dyno Pro Compe bikes pop with the awesome Dayglo Orange paint taking you right back to the 80s, these bikes are seriously bright.

The pictures seriously don't do this bike justice, with the small details such as the Dyno Seattube/seatstay area looking like it came straight off an early Dyno bike and the subtle GT Pretzel style bars tying it all together.

Not to mention the fully sealed bearing GT Superlace hubs, GT Alloy Power Series cranks and super comfy and grippy seat. Making the GT 2020 Dyno Pro Compe a well equipped bike perfect for longer rides and sick wheelies.

GT have really through about the bike and construction opting to add the Promax V-Brake underneath the seatstay so to not be knocked when standing on the rear frame and being damaged. Other points to note is the Mid BB bottom bracket bearings at the crank, using the same standard BMX bikes use meaning its easy to get replacement parts and with it using a larger bearing that Euro style BB (Like the SE Bikes) it will last longer before needing replacement.

GT have also used their latest Smoothie tyre, a real Thick version of the popular WTB Thickslick. Super fast rolling and 65psi max means a nice smooth ride without sacrificing too much speed. Or you can pimp your Dyno out with the Cult x Vans Waffle BMX Tyres and Grips found here.

With only 25 available in Europe exclusively through us tehse are sure to go fast and at just £699.99 they are an absolute STEAL! We also offer 0% Interest Finance upto 12 months (Subject to Availability) which you can do online at checkout, no stress!

Here is the lowdown from GT themselves:

• FRAME Dyno '87 Pro Compe Design, 100% Cr-Mo, DT Gusset, MID BB,Inverted Seat Stay V-Brake, Integrated 1-1/8” H/T w/ RemovableRotor Tabs, 2.5” Tyre Clearance

• FORK Dyno '87 Pro Compe Design, 100% Cr-Mo 2pc. Steerer, 31.8 O.D. Blades, 3/8” Axle Dropouts

• RIMS Alloy Double Wall, 36h

• FRONT HUB GT Superlace High, Alloy CNC Body, Sealed Bearings, 36h, 3/8”x 17mm Female Bolt

• REAR HUB GT Superlace High Cassette, Alloy CNC body, 5 Sealed Bearings, 3 pawl Cassette, 36h, 3/8” x 17mm Female Bolts

• SPOKES Stainless Steel, 14g

• TYRES GT Smoothie 29 x 2.5”

• CRANK GT Power Series Alloy 3pc., 175mm Arms, 22mm Square Cr-Mo Spindle, GT 5mm 36T 86’ Performer Design Alloy Chainwheel

• PEDALS GT Low Profile FS Platform Design, PP Material, Boron Axle

• BOTTOM BRACKET MID Sealed Bearing

• CHAIN KMC Z1 Wide

• REAR COGS 16T

• HANDLEBAR Dyno Pretzel Cruise Control 2pc. 100% Cr-Mo, 7.875”H x 31.5”W, 5°Up, 9° Back

• GRIPS GT Super Soft Flanged 155mm Single Compound w/ GT removable plug

• STEM GT Mallet 100% CNC Front Load, 1-1/8”, 19mm Rise, 43mm

• HEADSET 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings

• BRAKES Promax P-1 Aluminuim V-Brake w/ Soft Compound Pad

• BRAKE LEVERS Alloy

• SADDLE GT Cruise Control Railed

• SEAT POST Alloy Micro Adjust 25.4 x 300mm

If you made it this far, here is a 10% off voucher code for the Dyno Bikes. Just use the code DYNO and say thanks to Tom in the comments at checkout ;)