Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThe classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsThe classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full detailsThe Odyssey 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that Old or Mid School BMX needing a caliper brake. This ...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsThe Bluebird Chain from Odyssey uses a standard KMC 510-HX link and plate configuration and includes a KMC Pintle half-link that’s pre-installed a...
View full detailsGenuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
Sprocket Spacer. Spider Adapter. Tophat Washer. No matter what you call it, you probably need it, to make your sprocket fit your BB spindle properl...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsOur Alans BMX Race Team swear by Halo MXF hubs and at a mere 155g the MXF is a super light race hub and yet strong enough for freestyle. Smooth se...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsIconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsThe Shadow Conspiracy Interlock is the original and best half link chain on the market giving you maximum adjustability that is required for today'...
View full details• Copy of the Dia-Compe MX-1000 copy brake sets, complete front and rear including left and right Tech-III style levers, front and rear MX-1000 typ...
View full detailsQuality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsNow available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsThe mid-school classic has been re-released. A seriously grippy and durable pedal with an Alloy body, Steel pins, concave profile and meat tenderi...
View full detailsShimano DX Quality 3/32 cog. So can be used with narrow 3/32 race chains as well as the wider 1/8" single speed chains. • Can be used on new or old...
View full detailsBox Two™ Chain Tensioners let you dial in your chain tension so it's just right. Two mounting holes provide room for ample adjustment ...
View full detailsUS BB Size for 51mm shells and 19mm crank spindles. Available in a range of colours: Black, bluem gold, red or silver. Includes: 2 x Mid Bearings...
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full detailsThe new chain is based off the infamous ‘510’ design that has become the standard amongst top riders around the world. This is available in both ...
View full details• For that ultimate reduction in rotation mass, or a custom wheelset with added bling. • It is pretty well known that rotating mass offers the b...
View full detailsFor those running a pivotal seat but want a little extra length, S&M Bikes has you covered with the Long Johnson 320mm seat post. • 25.4mm dia...
View full detailsUSA Made Neptune BMX cross style sprocket influenced by the original Redline Flight Crank sprockets of the early 80's. We have used these on quite ...
View full detailsAdjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single hole "lollipop" design, these tension...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsSealed 1 1/8" integrated headset. Includes 2 bearings, crown race and coloured top spacer. Black, blue, gold, red or silver.
Box One™ Chain Tensioners are extruded then CNC-machined from 7075 aluminium for an optimal balance of strength and weight. A minimalist design add...
View full detailsHigh quality Dia-Compe sealed bearing CB-2 Headset is a quality lightweight threadless press-in cup-type ”Aheadset" for regular (not integrated) 1 ...
View full detailsThe Box Three V-brake features 6061-T6 alloy arms, Dual Compound brakepads and two Arm Lengths the new Box Three V-Brakes have all the features you...
View full detailsTake a step back in time with the Haro Legends sprocket, styled on the original Redline Flight sprocket. 5mm thick 6061 Aluminium 24mm centre hole ...
View full details• Alloy old school BMX style chainring.• 130BCD 5 arm design to fit old Takagi, Tioga & Shimano pattern cranks/spiders and powerdiscs. • Ma...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions