If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
United Supreme Bars classic 2 piece bars are available in Chrome, Gloss Clear & Black and come in a choice of 9, 9.5 or 10 inch rise. Rise 9", ...
View full details
With a 10 inch rise, the Ten Four Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing and a traditional...
View full details
A full cro-mo handlebar from Salt Plus in 9, 9.5 or 10 inch rise and in a chrome or black finish. Material: full crmo, multiple butted & post ...
View full details
S&M Bikes Perfect 10 Bars were made with big men in mind (N/H) and may be for the people who are trying to compensate for their inferiority. ...
View full details
The Raider (or RVIDXR) bars are David Grant's signature bars with a man-sized 10 inch rise. Made from multi-butted, post weld heat treated 4130 ...
View full details
Vultus Straight Gauge Bars Straight Gauge Tubing is strong and keeps cost down Rise: 9, 9.5, 10, 11" Width: 30" Back Sweep: 10° Up Sweep: 3° Colou...
View full details
The new Demolition x Markit bars! Rise: 9″, 9.25″, 9.5″, 10″ Width: 29″ Backsweep: 12° Upsweep: 2° Material: 4130 heat treated Weight: 33.2 oz (9″)
The Fedeal Assault bars are made from lightweight 13 butted 4130 heat-treated Chromoly with large radius bends and a raised logo on the crossbar. H...
View full details
The Primo Balance bars have you covered if you're looking for a taller handlebar - these come in a choice of 9.75" or 10" rise, just in black and f...
View full details
The Eclat Dive bars has been the handlebar of choice for most of the Eclat team since introduced back in 2010. What started off as one of the talle...
View full details
The Eclat Morrow Bars are developed from Eclat's popular Dive bar, with changes to the bending, geometry and tubing thickness, which make these bar...
View full details
Available in 9, 9.5 or 10 inch rise the Federal 4 piece Drop bars in chrome with a 29.5 inches width. • Rise: 9”, 9.5", 10" • Width: 29.5" • Ba...
View full details
The new Eclat Strangler four Piece Bars come in a choice of 9.1, 9,6 or 10 inch rise and are made from multi-butted heat-treated cro-mo tubing. The...
View full details
Looking for a solid 10 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a f...
View full details
Cult's Alex Kennedy Signature are made from 100% heat-treated butted Chromoly to keep the strength up and the weight down, with pre-marked cut line...
View full details
• 2 pc bar available in 8.8” or 9.2”. • 11ª Back sweep and 1ª Up sweep. • Black or Phosphate raw. "
• Craig Passero’s signature Rebar from Primo. • 9″ rise, 9.25, 9.5 or 10. • 28.5" width. • 2º upsweep/11º backsweep. • Also available in Chrome.
Kevin Peraza’s new signature 2-piece handlebar: the Heat Wave Bar. Available in 2 sizes, 9” and 9.25” rise. Bigger box and thicker tubing. Made f...
View full details
Flatland riders have specific equipment needs and S&M addressed these with the Intrikat bar. With input from S&M’s longtime flatland rider ...
View full details
The new Shun bar is made from a thicker 13 butted 4130 CRMO heat-treated tubing that was designed with all the butting in all the stress points of ...
View full details
With a 10″ rise and 30″ width the Hulk bars are big, plain and simple. Like all Kink handlebars, the Hulk bars use only the best 4130 chromoly stee...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
