Ask a Question

If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.

Close

SE Bikes 2020 Big Ripper 29 Inch Bike Shiny Red

Brand: SE Bikes
£699.99

Code: SEBBK046SR000

Special Order!
available 2-3 days!

Ask a Question

Brand: SE Bikes

2020 model due late October 2019 pre-order now.  

The 29” Big Ripper has been a staple in the SE line for over 10 years now. It’s built around a monster-sized PK Ripper style frame and features a stunning shiny red & chrome colorway. The spec is top notch with Cr-Mo Landing Gear forks, double-wall rims, Vee Speedster tires, and a new Lightning Bolt snap padset. One glance, and it’s easy to see that the Big Ripper is the baddest 29” BMX bike out on the streets.

 

SPEC

COLOUR: Shiny Red

FRAME: 6061 Aluminium Floval Tubing, Looptail Rear End, 68mm Euro Bottom Bracket, Retro Dropouts

FORK: Landing Gear, Full Cr-Mo

CRANKSET: SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket

PEDALS: X-Pedo Low-profile Platform w/ Removable Pins

CHAIN: KMC S1

WHEELSET: Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes

TYRES: Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear

BRAKESET: Tektro 837-AL V-Brake, Slick Cable FRONT CALPER BRAKE INCLUDED BUT NOT SHOWN

BRAKE LEVERS: FSA NO.42/ACB Sealed 1-1/8"-1.5" Tapered, Integrated Headset

HEADSET: Tange 1-1/8" Threadless

HANDLEBAR: Big Honkin' Cr-Mo Cruiser Bar, 29" x 6", 10° Backsweep, 1° Upsweep

STEM: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach

GRIPS: Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts,

SEAT: SE Flyer Seat w/ Custom SE Bottle Opener Brace

SEATPOST: Micro-Adjust Alloy, 27.2mm

SEAT CLAMP: SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter

ACCESSORIES: SE Racing Rad Number Plate, Lightning Bolt Snap Padset, Alloy Valve Caps, SE Wheelie Pegs

WEIGHT: 29.6 lbs / 13.42 kgs

 

*Spec subject to change without notice

 

GEOMETRY

TOP TUBE, ACTUAL: 23.6"

SEAT TUBE, CENTER TO TOP: 16.9"

SEAT TUBE ANGLE: 71°

HEAD TUBE ANGLE: 71°

CHAINSTAY LENGTH: 18"

WHEELBASE: 43.7"

BOTTOM BRACKET HEIGHT: 12"

STANDOVER: 30.5"

SUGGESTED RIDER SIZE: 5'5"+ (165cm+)

STEM: 55mm

HANDLEBAR WIDTH: 29"

CRANK: 175mm

WHEEL SIZE: 29"

SEAT POST DIAMETER: 27.2mm

 

"
x