Volume Voyager Bars
The new Voyager bar is made from all thicker 13 butted 4130 CRMO heat treated tubing that was designed with all the butting in all the stress point...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The new Voyager bar is made from all thicker 13 butted 4130 CRMO heat treated tubing that was designed with all the butting in all the stress point...
View full detailsThe Shadow Conspiracy Odin Top Load Stem was designed with input from Mark Burnett, it is cold forged and CNC machined 6061-T6 Alloy. Mark specific...
View full detailsThe new Terrible One Classic Handlebars are available now in a range of Rises and Colours 8' Rise - 28 Inch Wide 8.25" Rise - 28.5 Wide 8.5" Rise &...
View full detailsThe Relic DIY bars are a proper "man's bar" with a 9.35" rise, 30" width and straight gauge 4130 tubing. Relic is a über cool UK based BMX brand cr...
View full detailsMaterial: 6061-T6 alloy Colors: black, oil slick Features: high rise, top loading stem design, STC (Shark Tooth Clamping) inside the stem to help...
View full detailsThe Challenger stem from S&M is back friends... and yes, it’s exactly the same as the original. So obviously, this hunk of awesome is much too...
View full detailsThe small crossbar on these S&M Bikes Credence handlebars and 8.7" rise makes it just a relevant to an Oldschool build as it does on a up-to-th...
View full detailsRetro cruiser look bars with modern geometry. Add some style to your cruiser with these rad new 7" rise bars from S&M. Made in USA of course! R...
View full detailsUnited's resident heavy-hitter, Harry Mills-Wakley needed a set of bars up front that he could take a beating. These HMW handlebars are made from b...
View full detailsIf you liked the S&M Mike Hoder bars, but wish they were a bit higher... here you have the Hoder High bars! Same comfortable/strong design as t...
View full detailsAnimal Multi Butted Chromoly 4 pc Bars. • Post Weld Heat Treatment. • Rise: 9" • Width: 29" • Backsweep: 11° • Upsweep: 5° • Crossbar...
View full detailsThe all new 12 Step Bar from S&M features a 12" rise and is perfect for all those taller riders out there or any one looking to step it up in t...
View full detailsThe Box Two Top Load Stem is a modern 1-inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and ...
View full detailsAnimal Pop Off USA Made Stem Modern update of our classic Top load. 48mm reach. American made. Black, gold or raw.
By using custom butted alloy tubing, Radio were able to design the “perfect” Expert race handlebars with a 5.5 inch rise. Material 6061-T6 alloy T...
View full detailsThe Eclat Domain Topload Stem follows the clean simple lines of the frontload version. Constructed of 6061-T6 alloy, the Domain stem is fully CNC ...
View full detailsThe new Eclat Strangler four Piece Bars come in a choice of 9.1, 9,6 or 10 inch rise and are made from multi-butted heat-treated cro-mo tubing. The...
View full detailsLooking for a solid 10 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a f...
View full detailsOG S&M Bikes Slam Bars, a classic, still made in USA like they always were. These come with orginal Slam and Shield stickers, 8" x 28", chrome....
View full detailsWhy Choose between fashion or function when you can have both! The new Subrosa Rose Upload Stem features a shorter 48mm reach and a tall 36mm ris...
View full detailsCult's Alex Kennedy Signature are made from 100% heat-treated butted Chromoly to keep the strength up and the weight down, with pre-marked cut line...
View full detailsThe new Index front load stem from Wethepeople stem offers a taller 16mm rise, which allows you to run your bars as high as some topload stems, wit...
View full detailsThe Max Max is WeThePeople's new big handlebar with a 10.2" or new 11" rise and a whopping 30.5" width and is available in Regular 22.2 or Oversize...
View full detailsMaterial: 6061-T6 alloy, fully CNC machined Colors: black, oil slick, matt silver/red splash Features: front loading stem design, STC (Shark Toot...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions