If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Brand new from S&M - The Hoder Super High Bars! Featuring a big box design, straight guage 0.83 wall 4130 tubing and dual radius bends for incr...
View full details
The legendary BF Brian Foster signature stem from Fit is back! At just over 28mm tall, it’s inbetween the Aitken and High-Top stems. With two lengt...
View full details
The new Relic Elect stem is a 52mm reach 22mm rise stem designed for Trails and Bowl riding in mind. The stem can be inverted to be a 9mm rise for ...
View full details
The Stranger ISM Bars - designed in collaboration with ISM cycling. A classic big box shapepe two piece bar made from 100% heat-treated straight ga...
View full details
If you after switching to 4 piece bars, then check out these Fu-Bars from S&M, with a 9 inch rise and 29 inches wide. Straight gauge 4130 tubin...
View full details
S&M 5 inch cruiser race bars, 29 inches wide in black or chrome. USA made of course. Rise: 5" Width: 29" Up Sweep: 2° Back Sweep: 10° Cross B...
View full details
Kevin Peraza’s new signature 2-piece handlebar: the Heat Wave Bar. Available in 2 sizes, 9” and 9.25” rise. Bigger box and thicker tubing. Made f...
View full details
Introducing Felix Prangenberg's signature Wethepeople bars, the 2 piece Pathfinder comes in a 9" or 9.6" rise and Standard 22.2mm or Oversize 25.4...
View full details
The Void is Relic's classic two piece cro-mo handlebar for those looking for a clean, simple, classic design, available in 8.8 or 9.1 inch rise. •...
View full details
The Salt Plus Field is a high quality, full CNC machined front load stem with a 50mm reach and 23mm rise, available in black or Oilslick. Material...
View full details
Material: 6061-T6 alloy, full cnc finish Colors: black, oil slick, matt silver/red splash Features: high rise, top loading stem design, STC (Shar...
View full details
Kink Contender Bars - Chrome 9.75" Dan Coller signature Dan Coller€™s signature bars, coming in at a comfortable 9.75€ rise. Offering pre-marked c...
View full details
Weight 0.785kg/ 1lb 12oz (8.5")0.794kg/ 1lb 12oz (8.75")0.83kg/ 1lbs 13oz (9") Spec Heat-treated butted 4130 Chromoly Steel8.5", 8.75" or 9" rise28...
View full details
• 2 pc bar available in 8.8” or 9.2”. • 11ª Back sweep and 1ª Up sweep. • Black or Phosphate raw. "
The S&M ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single ca...
View full details
• Craig Passero’s signature Rebar from Primo. • 9″ rise, 9.25, 9.5 or 10. • 28.5" width. • 2º upsweep/11º backsweep. • Also available in Chrome.
Dennis Enarson’s all new signature 2-pc Rig bar. Available in 2 sizes, 9” and 9.25”. Bigger box and thicker tubing (1.8t) help make the Rig bar str...
View full details
Tall Order's Ramp Bar is made from heat-treated Chromoly, butted so the strength remains in key areas but are lightweight. The small diameter cross...
View full details
The new Jordan Hango made-in-USA signature stem from Fit Bike Co has a short 48mm reach. All the edges are nicely rounded with CNC machining and it...
View full details
8 Inch rise version of the S&M Fu-Bar available in Black or Raw. Rise - 8” Width - 29" Upsweep - 1.5° Back Sweep - 10° Cross Bar - .75" Weight...
View full details
Stevie Churchill's signature Stranger NASBAR is made to his spec from heat-treated straight gauge Chromoly for extra durability. Weight 1.030kg/...
View full details
Federal's V3 Bruno bars now come in 9.25” rise, Bruno was keen to have a higher bar while still keeping the back and up sweep the same as his previ...
View full details
Based on the classic "trail style" stems we all used to ride back in the day, the Wethepeople Patrol stem features a smooth, simple shape with a wi...
View full details
A beast like Dillon Lloyd needed a bar built to withstand the biggest drops and burliest of crashes. the buck bar was one of the first bars in BMX ...
View full details
The Fleck front loading stem has the certified strength as previously seen in the Purge stem. A fully CNC 6061 Ali block stem with a front loading ...
View full details
Federal Element Front Load Stem - Silver 50mm Reach Simple but effective. Cold forged 6061 Aluminium keeps the strength high and the price low. We...
View full details
Stranger Piston 4 Piece Bars - Matt ED Black Connor Keating signature Butted 4130 Chromoly tubing makes for a strong but light handlebar. Connor's ...
View full details
• 13 butted, heat treated Cr-Mo bars. • 16mm diameter brace. • X-knurled centre • Width 28,75 inches (7...
View full details
Continuing on with the geometry Simone has ridden for years, the new Simo bar gives an updated look to a classic Subrosa product. The Simo bar w...
View full details
Garrett didn’t want to cut his 8.75″ rise bars down in width anymore so we did the work for him with the width of his choice. Same proven heat tre...
View full details
The new Stay Strong Chevron Cruiser Race handlebars are made from 100% heat treated Cro-moly. Material: 100% 4130 heat treated Cro-mo, Butted: 11 (...
View full details
The new Stay Strong Chevron Race BMX handlebars are made from 100% heat treated Cro-moly and are come in 7.0, 7.5, 8.0, 8.25 and new 8.5" inch ris...
View full details
Sean Burns could well be the greatest test dummy for any parts brand ever. He came to us with a strong idea about a solid stem that could hold up a...
View full details
The Cobalt Pro is a powerful, lightweight race stem specifically designed for 1 1/8” steerer tubes. This race powerhouse is constructed with a cast...
View full details
Radio's alloy Xenon Micro handlebars come in 2" rise and use 6061-T6 butted tubing to keep the weight down for the little racers. Material 6061-T6...
View full details
The S&M ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single ca...
View full details
Looking for a solid 10.5 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a...
View full details
Heresy DISMEMBER 4pc Bars come in four sizes, 8.25″ 8.75″ 9" and 9.5″. All have a flatland friendly backsweep, 3,5° for the 8.25″, 5° for the 8.75″...
View full details
8.5''Height 8.5'' / back 3.5° / up 4° / width 26,2′′ / 718g / ED Black / Black vinyl transfer sticker9"Height 9''/ back 5° / up 4° / width 28,3''...
View full details
Flatland riders have specific equipment needs and S&M addressed these with the Intrikat bar. With input from S&M’s longtime flatland rider ...
View full details
Based on the legendary Slam Bars, the Race XLT series is the evolution of S&M racing handlebars. Thinner-walled tubing, post-weld 4Q heat-trea...
View full details
Replica of 1972 – 1977 Husqvarna Motorcycles High Crossbar design. Original dimensions upgraded with modern materials. Put ’em on anything with tw...
View full details
Call it a perk of owning the company. Chris “Mad Dog” Moeller wanted vintage motorcycle MX bars built to his own specs. Here they are. Whether you’...
View full details
Experience a cosmic ride with the BSD S4F4RI Bars! Constructed from heat-treated 4130 chromoly, these bars give you a new-age feel with the same c...
View full details
Take your BMX riding to the next level with BSD ALVX Bars! Made from multi-butted chromoly and available in 3 heights and are 28" wide. Alex D hims...
View full details
This classic front load design uses Odyssey’s proven 6-bolt clamping system with a larger size bolt and unique surface contouring in the clamping ...
View full details
Multi Butted Chromoly traditional 2 piece Bars from Animal, in 9 or 9 1/2" rise. Available 9.5" and 9.0" rise.Post Weld Heat Treatment.Rise: 9.0" ...
View full details
Chase Dehart signature stem from Cult, CNC machined from 6061 Aluminium with engraved logos on the faceplate and around the top cap recess. Ideal f...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
