Dia-Compe Bulldog Freestyle Front Brake
The DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsCR-MO chainring bolts High quality Cr-Mo steel. Chrome plated. Single 6.5mm - also available in Double or Triple (XL) Set of 5
ODI took our best selling grip - the Longneck Pro - and have made it even better with the new longer and softer Longneck SLX. New longer 160mm len...
View full detailsThe A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full detailsSkyway Tuff Wheel 3/8" axle nuts in coarse (24tpi) or regular (26tpi) pitch. Old Skyways use 24tpi, modern Skyways can use either. Can also be used...
View full detailsVelo VL-117 Kashimax-style Old School "Aero" BMX Seat as used by most bikes from the last 70's right into the 90's with silver plated seat guts in...
View full detailsThe grip of choice for our Robinson and Torker UK race team back in the 80’s, the A’ME Tri grip is now available again, made in USA just like it al...
View full detailsDating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full detailsThe Odyssey MPEGs replace the popular GI pegs and are our most popular set of pegs, sold as a pair in Black or Chrome and they fit 10 or 14mm axle...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsRenowned Nutrak quality and value Welded butyl rubber construction is robust yet lightweight Presta Racing Type Valve 48mm long (Unless LV) LV is ...
View full detailsAvoid damaged freehubs with these precision CNC machined Cr-mo HG style sprockets with an offset 7mm wide foot to avoid digging into softer alloy...
View full detailsThe Longneck has been our best-selling grip of the last ten years and it's genes can be traced back to the original ODI Mushroom grip of the early ...
View full detailsDating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full detailsChrome 3/32" DIcta freewheel in sizes 14 to 18 teeth. To fit the narrow 3/32" race chain but will work with regular 1/8" BMX chains also. NOTE: 14...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsA more traditional style brake pad from Odyssey, the A-Brake pads come in Black for standard rims and also Clear Soft compound for that extra braki...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsThe sealed bearing Odyssey Mid Bottom Bracket is available to fit 19 or 22mm crank spindles and comes in black or limited edition colours. Mid BB...
View full detailsNUMBERS ONLY - DOES NOT INCLUDE SIDE NUMBER PLATE ITSELF! NOTE: We are not always able to print these for you in store "while you wait" especially ...
View full detailsAllows 10mm or 3/8 axles to fit in 14mm BMX frames for forks. CNC machined alloy.
The classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full detailsThe finishing touch for your old school BMX restoration: Genuine DiaCompe silver brake cable clamp to keep your cable in place available in three s...
View full detailsCurrently our best-selling grip, Broc Raiford can bunnyhop over a house so it’s only right that he has his own Odyssey signature grips to hold on t...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions