Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full detailsGreat value Salt AM steel pegs, 14mm with 10mm adaptors, 4.15" long, sold as a pair (2) and available in a ton of colours. Material: forged steel S...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsIconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full detailsSprocket Spacer. Spider Adapter. Tophat Washer. No matter what you call it, you probably need it, to make your sprocket fit your BB spindle properl...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsThe SE Racing Bear Trap pedals offer authentic Old School BMX styling, and a lot of grip and stability. The extra wide “bear trap” cages keep your ...
View full details• Lightweight, high quality ID Aluminium replacement chainring bolts.• Anodised colours - Blue, Gold, Green, Black, Red or Purple (1/3 the weight ...
View full detailsPerfect for race bikes (with 10mm axles) or old school rides. These also protect your dropouts as well as preventing your wheel from slipping when...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsIconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsThe Shadow Conspiracy Interlock is the original and best half link chain on the market giving you maximum adjustability that is required for today'...
View full detailsClassic made in USA Profile Racing American bottom bracket to fit the large old school bottom bracket fitment and for 19mm 3 piece cranks. • For u...
View full detailsGenuine DiaCompe GRAN COMPE Single speed chainring bolts sold as a pack of 5 in black, blue, gold or red. 6.5mm long for single chainring use.Ligh...
View full detailsUS BB Size for 51mm shells and 19mm crank spindles. Available in a range of colours: Black, bluem gold, red or silver. Includes: 2 x Mid Bearings...
View full detailsNow available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions