If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The Arcane Solidstate alloy micro chain tensioner, made from lightweight CNC Machined Alloy This micro dropout compatible tensioner is...
View full details
Box One™ Chain Tensioners are extruded then CNC-machined from 7075 aluminium for an optimal balance of strength and weight. A minimalist design add...
View full details
Box Two™ Chain Tensioners let you dial in your chain tension so it's just right. Two mounting holes provide room for ample adjustment ...
View full details
• Made in the USA. • Sold in Pairs (Right and Left) and include 2 tensioners, 4 bolts, and 4 nuts. • For use with 3/8″(10mm) axles only. • Colo...
View full details
SE Bikes Lockit chain tensioners for 3/8” (10mm) axles allow for perfect chain adjustment and will keep your rear wheel locked in place. • CNC 60...
View full details
Bullseye ORIGINAL design. Built in, Hop up, Allen bolt covering alloy Chain Tensioners. 10mm/3/8". Best-In-Industry CNC machining. Made in USA. Not...
View full details
Genuine MKS chain tensionersPatented chain adjustersHub Spindle Dia: 10mmPairs Dropout Thickness: 5 mm / 8mmNJS/Keirin approvedMade in Japan
Old school chain tensioners compatible with 3/8 (10mm) axles. Sold as a pair - 1 left and 1 right.
Oxford Chain Tug Tensioner Black 14mm Sold as a pair Suited to 14mm axles
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single hole "lollipop" design, these tension...
View full details
• Simple chain tensioners. • Fits 10 or 14mm axles (adaptors supplied). • Will not work on frames with very small dropouts. "
• New old stock alloy chain tensioners from Antix (from the guys who ran SE Racing at the time). • Sold as a pair. • For 14mm a...
View full details
Bullseye Cycle was founded in 1973 in Southern California.We pioneered many component designs and showcased innovations that set the reference for...
View full details
14mm Salt Pro chain tensioner, sold individually. Material: 6061 T6 alloy, cnc finish Size: outter diameter 32mm, 14mm axle hole, 3.5mm thickness ...
View full details
D20 Chain Tensioners in Black 10mm fit only. Ideal for small dropout bikes
Bullseye Cycle was founded in 1973 in Southern California.We pioneered many component designs and showcased innovations that set the reference for...
View full details
Genuine GT alloy 10mm BMX chain tensioners with single allen key adjustment. Lightweight alloy. Fits some modern race bikes (without 3D dropouts) a...
View full detailsMonday CLOSED
Tue-Fri 11am - 3pm
Sat 10am - 4pm Sun CLOSED
