Odyssey 13T Freewheel Remover
If you're rocking a classic 13t freewheel setup, here's a removal tool to help you take it off. Works on Odyssey 13t freewheel only.
If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
If you're rocking a classic 13t freewheel setup, here's a removal tool to help you take it off. Works on Odyssey 13t freewheel only.
Genuine Odyssey cassette cog in 12, 14 or 16T sizes. • For 1/8" single speed chains (work not work with narrow 3/32" multi speed chains). • Shiman...
View full detailsReplacement 14mm or 3/8" axle bolts for all current production GSport, Odyssey, or Sunday hubs. 14mm bolts are sold in pairs.3/8" are sold individu...
View full detailsReplacement precision caged needle bearing for Clutch v1/v2 freecoaster hub. Sits in between driver and drive side collar. 20x24x13
Replacement oversized 4130 Chromoly female axle for the Clutch v2 hub freecoaster. 14mm Bolts Included. (This configuration is lighter and stronge...
View full details• Replacement driver for Odyssey Hazard hubs.• 4 pawl type (pawls not included, available extra).• Bearings included.
Spare parts for Odyssey Clutch Pro Freecoaster Hubs Odyssey Clutch Pro Hub Collar (Drive Side) Odyssey Clutch Pro Hub Drag Mechanism Odyssey Clut...
View full detailsReplacement drag mechanism assembly, with spring, for Clutch v1/v2 freecoaster hub.
• Replacement driver for Odyssey Hazard hubs. • 3 pawl type (pawls not included, available extra). • Bearings included.
Odyssey Clutch Pro Replacement Hub Shell For Clutch PRO hubs only, does not fit Clutch V1 or V2
Replacement 10mm drilled hollow axle for Odyssey Race Cassette. NOTE: Hub is not included, picture to shows the hub that fits that axle.
Replacement engagement clutch cone piece for Clutch v2 freecoaster hub. Available in either Right or Left hand drive.
Replacement 9-tooth chromoly driver for the Clutch v2 freecoaster hub. Includes needle bearing and collar. Available in either Right or Left hand ...
View full detailsReplacement non-drive side circlip for Clutch v1/v2 freecoaster hub. 35mm.
Replacement slack adjuster screw for Clutch v1/v2 freecoaster hub. Use 2.5mm hex key.
Replacement non-drive side collar for Clutch v1/v2 freecoaster hub. Black only.
Replacement drive side collar for Clutch v2 freecoaster hub.
Replacement plastic slack helical adjuster for Clutch v1/v2 freecoaster hub. 2 pieces.
Replacement drive side sealed angular contact cartridge ball bearing for Clutch freecoaster hub. 7905RS.
Replacement non-drive side sealed cartridge ball bearing for Clutch freecoaster hub. 6003RS.
Opening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions