If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Profile Elite 9 tooth RHD driver for use Profile Elite hubs.Chromoly. Fits Profile Elite hubs only Does NOT include springs and pawls (these sold s...
View full details
Odyssey Clutch Pro Replacement Hub Shell For Clutch PRO hubs only, does not fit Clutch V1 or V2
A replacement driver for the Tall Order Drone cassette hub. This comes set up for RHD but is compatible with both RHD / LHD drive.9t driverSold ind...
View full details
Sealed bearings for plenty of applications such as Hubs, Drivers and more Sealed cartridge bearing, 6902 2RS - 15x28x7mm Sealed cartridge bearing...
View full details
Halo HG Cassette Lockring Black Lightweight CNC alloy, HG type Cassette Lockring.CNC machined lightweight aluminium.Saves 5g from the weight of reg...
View full details
Replacement 10mm drilled hollow axle for Odyssey Race Cassette. NOTE: Hub is not included, picture to shows the hub that fits that axle.
KHE replacement stud for BMX hubs with a 14mm axle diameter. Specifications: Axle length: 30mm Hexagon socket (for tightening the stud)
Replacement set with ratchet and c-clip for Eclat Blind freecoaster hub.
Profile Elite splined alloy driver for use with Profile cogs. Fits Profile Elite hubs only Does NOT include springs and pawls (these sold seperately)
14mm Metric rear hub bolts to replace your worn out bolts in your WTP Supreme Hub. Sold in pairs
Replacement engagement clutch cone piece for Clutch v2 freecoaster hub. Available in either Right or Left hand drive.
Replacement 9-tooth chromoly driver for the Clutch v2 freecoaster hub. Includes needle bearing and collar. Available in either Right or Left hand ...
View full details
Replacement non-drive side circlip for Clutch v1/v2 freecoaster hub. 35mm.
Replacement slack adjuster screw for Clutch v1/v2 freecoaster hub. Use 2.5mm hex key.
Replacement non-drive side collar for Clutch v1/v2 freecoaster hub. Black only.
Halo MX Hub Axle Bolts: Replacement Cro-Mo Hub bolts with Cro-Moly Washers set for MXF/MXR BMX Hubs Specifications Material: Cro-mo bolts with...
View full details
4 Prong Track Lockring in Reverse LH Thread. Fits GT Speed Series Hubs that use the 3 prong LH thread longrings 1.29" x 24T thread pitch Basic, sim...
View full details
• Manufactured at Profile Racing's U.S.A. plant using aerospace grade titanium (lighter than chromoly). These CNC machined cassette driver...
View full details
Spare parts for the GSport Roloway hubs including Axles, Hub Bolts, and collars only in black 3/8 bolt is same as 10mm bolt 14mm bolts f...
View full details
• Replacement left & right cone nuts to suit Colony Clone cassette hubs.
• If your driver is tight on your profile hub then this washer will fix your issue. It spaces the driver out from the bearing in the hubshell givin...
View full details
• These allow you to use female bolt-type 10mm cassette hub on your frame with 14mm dropouts, for that clean look. Can also be used on the front ...
View full details
Single replacement Profile Racing pawl and spring for Mini, Totem or Elite cassette hubs. • Sold as individual Pawl or Spring • These pawls & ...
View full details
If you're rocking a classic 13t freewheel setup, here's a removal tool to help you take it off. Works on Odyssey 13t freewheel only.
Great replacement hub bolts 17mm socket and 6mm allen key. Fits standard 10mm Metric hubs from almost every brand excluding Profile/Madera
Replacement 10.0mm x 175mm long Chrome Moly Axle for loose ball hubs. Controlled specification ensuring longer life Chrome moly guaranteeing extr...
View full details
Replacement drive side collar for Clutch v2 freecoaster hub.
Weldtite replacement 10.0 x 145mm Chrome Moly Axle for loose ball hubs. Cones included. Controlled specification ensuring longer life Chrome moly...
View full details
Weldtite replacement 9.5 x 175mm Chrome Moly Axle Controlled specification ensuring longer life Chrome moly for extra strength
Profile Bearing Kit for Front or Rear Race, SS, Mini, Elite, Totem and Mini Lite hubshells only. Does NOT include driver bearings 2 x bearings incl...
View full details
• This is a conversion kit for Mini, Totem, and Madera V2 Cassette from the 3/8" (10mm) 3 piece axle to the 14mm Gun Drilled Hollow axle....
View full details
This is a conversion kit for riders who previously had a Profile Mini hub with a 14mm axle who now want the lightness of our aluminum center axle...
View full details
Replacement plastic slack helical adjuster for Clutch v1/v2 freecoaster hub. 2 pieces.
Fits Profile Hubshells (NOT drivers) and some others: 17MM ID x 30MM OD x 7MM W)For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
