If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The S&M Redneck shed its shaft in 1995 thanks to Dia-Compe’s new A-headset, and would forever remain clamped-on. For a brief time, some forks h...
View full details
Handbuilt pro-level Eclat cassette wheel using an E440 Rim laced to a Seismic cassette hub which includes nylon drive and non drive side hub guards...
View full details
Here we have the Eclat Bondi rim built onto the Cortex Freecoaster Hub (in LHD or LHD) using Eclat stainless spokes, rim tape and two fibreglass hu...
View full details
• GDH (Gun Drilled Hollow) Chromoly spindle to fit 19mm 7/8-inch 48 spline cranks. • Available lengths 5 5/8 (standard BMX size) and 6 inch. • Hol...
View full details
Sealed bearing Pirate Mid size bottom bracket for 19 or 22mm cranks. Sealed bearing. All black. Tube spacer. Washer/spacers. Top hat washer includ...
View full details
The Sniper is a more refined lever from éclat, a sleeker looking model but still using cold-forged 6066-T6 alloy and utilising all the modern elem...
View full details
Bossless crank arms for Spline drive use only • Tubular welded CrMo crank arms are available in more colours and sizes than any other crankset. • ...
View full details
Titanium Profile Spider bolt for Profile or Madera cranks ONLY.
Replacement plastic slack helical adjuster for Clutch v1/v2 freecoaster hub. 2 pieces.
The Griplock is Colony's Team designed tyre with a high 110psi pressure rating, and all-round fast-rolling tread pattern and is available in 2.20" ...
View full details
Fits Profile Hubshells (NOT drivers) and some others: 17MM ID x 30MM OD x 7MM W)For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic...
View full details
• Genuine Profile crank installation/removal tool. • ONLY Fits solid Profile Elite Cranksets
Made in USA, these Profile Race are the cranks that all other cranks are judged by. 48 splines. 19mm Gun Drill Hollow spindle. Available in 5mm len...
View full details
Machined alloy 6061 T-6 alloy core with holes for extra lightness 1.2mm wall 4130 chromoly outer sleeve. Lightweight anti-twist hex washers fit 10m...
View full details
The Haro Catapult tyre is a great all-rounder with knurled wide spread tread pattern that gets great traction on trails and hard-packed dirt ...
View full details
The classic Primo Balance Seat is back. Black with embossed griffin logo on the top panel and a stitched Primo logo on the rear. A new modern tak...
View full details
Here is Matthias Dandois' Pro model signature "La Bastille" Haro frame and whilst Matthias can ride anything he's best known for his flatland, so...
View full details
Discover the Salt Plus Manta Sprocket - crafted from high-quality CNC machined alloy for maximum durability, with four sprocket bolt holes for a lo...
View full details
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, we harken back to simpler times. We wanted a hand...
View full details
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an...
View full details
Classic S&M Slim seat with Railed Fitment Black with orange For Railed seatposts Classy embossed S&M logo cover Seatguts not included View...
View full details
As well as a complete bike, the Haro Lineage Ground Master Frame Set is now available in 19.5" toptube (Flatland Specific). Created to take a DNA s...
View full details
S&M Bikes, made in USA, Chain Saw Sprocket in Polished Silver. A classic take on a Profile Ripsaw sprocket. 24mm centre supplied with 19 & ...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
