Ask a Question

If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.


Renthal Traction Lock-On Grips

Brand: Renthal





Ask a Question

Brand: Renthal

Renthal Traction lock-on grips are developed for extreme conditions and for those that want additional mechanical grip and are available in four different compounds. 

Traction grips use an advanced design and need to be set up correctly. With the words 'top' and 'forward' accompanied by some useful arrows, setting up the Traction grips is a cinch. The reason for this positioning is that the grip pattern alternates around its circumference to more effectively interact with each part of your hand.
The traction grip has six unique features;
1. Forward Facing Ramped Finger Ridges;
When pulling back on the handlebars, the majority of the grip and torque is concentrated through the fingers. Forward facing, ramped ridges in the finger area give increased grip when pulling back, yet lay flat in normal riding conditions, for improved comfort.
2. Rearward Facing Angled Palm Grooves;
When braking or steep descending, the majority of the torque and grip is concentrated through the palm. Grooves cut with a rearward facing angle give improved grip in this situation. As the groove is cut into the grip, it gives a comfortable, large surface area for the palm in normal riding conditions.
3. Consistent Pattern;
The grooves and ridges are consistent across the width of the grip, to accommodate riding with your hand in any position on the grip. Be it right in the centre, or with the heal of the hand over the end of the grip, the additional traction is just as effective.
4. Open-Ended Grip Features;
Riding in extreme conditions, crashes are inevitable, which can result in the grip getting packed with mud. We designed the grips to have open-ended features, allowing mud to be purged off the end of the grip. Simply push outwards with your hand.
5. Offset Grip Material;
For comfort, the thickness of grip material under the palm area has been increased to give improved cushioning. Thinner grip material is used under the finger area to keep the overall outside diameter the same.
6. Compound Options;
We offer this grip pattern in four compounds;
- Ultra Tacky
- Kevlar
- Soft
- Medium

•  Left and right specific with forwards and top side arrow markings.
•  CNC machined 6082 T6 aluminium locking collars.
•  Integrated grip body and locking collars for ultimate durability.
•  Four compounds available.
•  Smooth profile end transition, for maximum comfort.
•  130mm overall length, 110mm grip section.
•  30.5mm outside diameter.
•  Snap-fit end caps.
•  116g weight (pair).
•  Kevlar, Ultra-Tacky, Soft or Medium.