Budget GT Slammer Mercardo Flatland Bike

Budget GT Slammer Mercardo Flatland Bike

When you boil it all down, Flatland is where you learn your bike handling skills, just look at it's influence in modern street riding and even park. You can do Flatland anyway pretty much, a garage, empty parking lot, etc. However, flatland is specialised and building a bike from scratch is not cheap (but, hey, we can do this for you of course if you wish).

Buy here

But if you just want to dabble in Flatland, then check out this GT Slammer Mercado which we took and added:

• Gyro and gyro tabs.
• 4 steel pegs BRAND MAY VARY (with griptape, supplied loose so you can decide whether to fit or not).
• Long 400mm alloy micro adjust seatpost. Original 200mm seatpost included.

All in all these additions would normally cost you about £90. If you want to go a bit further you could add some narrower flatland specific tyres here. Having said that,  not all Flatland riders use narrow tyres, so the stock ones will be fine, at least to start until you figure out your preference.

PLEASE NOTE: These bikes DO NOT come with a front brake included, if you need a front brake please contact us for options.

The GT Slammer has the aspiring Olympic skatepark rider in mind, presented here in Pro rider Albert Mercado's signature colourway. The frame's geometry is quick and  responsive, allowing the bike to handle easier as the young rider builds up their strength. Items like sealed mechanism 14mm axle, sealed cranks, 9T cassette hub, and adjustable railed seat are the little details that will allow this future champion to practice with confidence.

Product Specification

SIZE 20"
MODEL CODE G44302U10OFL
FRAME 100% Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay U-Brake, External 1-1/8" H/T, Removable Rotor Tabs
FORK 100% Hi-Ten, Tapered Legs, 31mm Offset
CHAIN KMC S1
CRANK GT Power Series 3pc Chromoly 170mm, 19mm x 8T Spindle, GT NBS 25T Steel Chainwheel
BOTTOM BRACKET American Loose Ball Bearing
PEDALS GT Logo PC Platform
COG SET 9T 1pc. Driver
RIMS Alloy Single Wall, 36h
TYRES GT NBS 2.4"
GYRO Oxford 1 1/8" or similar
FRONT HUB Steel Loose Ball 3/8" Axle
REAR HUB Alloy Semi-Sealed 14mm Cassette
SPOKES Stainless Steel, 14g
BRAKE

NBS Alloy U-Brake w/ Soft Compound Pad. 

BRAKE LEVER NBS Alloy
HANDLEBAR GT 2pc Freestyle, 100% Hi-Ten Steel, 8.5"H x 29"W, 3°Up, 11° Back
STEM GT NBS Top Load 40mm, 32mm Rise
GRIPS GT Super Soft Flangeless
HEADSET 1-1/8" Threadless, Steel
SADDLE Railed Saddle
SEAT POST Micro adjust Alloy, 25.4mm x 400mm
PEGS Oxford Steel or similar with griptape supplied


Buy here

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.