Profile Racing Galaxy 22mm Spline Drive Sprocket
Profile Racing Galaxy 22mm spline drive sprocket, Madein USA of course. • Only fits 48-spline 22mm spindles. • 25 and 28T sizes. • Available in re...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Profile Racing Galaxy 22mm spline drive sprocket, Madein USA of course. • Only fits 48-spline 22mm spindles. • 25 and 28T sizes. • Available in re...
View full detailsProfile Racing bolt on style spider is for use with all 19mm spindle cranks with a standard sprocket bolt in either 4 or 5 arm pattern in high poli...
View full detailsWe can now offer female (bolt) Profile Mini hubs with all the different bolt options. As well as a choice of 9 to 18T driver options. 9, 10, 11T ar...
View full details• If your driver is tight on your profile hub then this washer will fix your issue. It spaces the driver out from the bearing in the hubshell givin...
View full details• Made in the USA. • Sold in Pairs (Right and Left) and include 2 tensioners, 4 bolts, and 4 nuts. • For use with 3/8″(10mm) axles only. • Colo...
View full details• These allow you to use female bolt-type 10mm cassette hub on your frame with 14mm dropouts, for that clean look. Can also be used on the front ...
View full detailsGenuine made in USA Profile Racing 4 or 5 Arm alloy spider for 19mm cranks. CNC machined in USA. • 4 Bolt (104MM BCD) for 19mm axle • 5 Bolt (11...
View full detailsGenuine Profile Racing Aegis front hubguard that fits Profile Mini and Totem hubs. Madera BMX hubs. • Material: 7075 Aluminum. • Front: 3/8 (10mm) ...
View full detailsSingle replacement Profile Racing pawl and spring for Mini, Totem or Elite cassette hubs. • Sold as individual Pawl or Spring • These pawls & ...
View full detailsAwesome vintage re-pop original Profile Racing logo (Circa early 80’s) in patch form. -Made in the USA. -Sold as a single patch.
For those running a freewheel, we now offer these matching pair of Profile Racing hubs - Nomad rear and Elite front. High quality hubs that you co...
View full detailsThe Profile Racing Euro threaded Euro BB ncludes LH & RH threaded cups, bearings (4), tube spacer, cone spacers (2), & aluminium spacers. ...
View full detailsProfile Racing, made in USA, slim super-light seatclamp in 28.6mm ID. • 28.6mm diameter. For steel frames that use a 25.4mm seatpost (most modern ...
View full details• Shafted Profile Racing stem. • Fits Oldschool bikes with 1 inch threaded forks. • Great if you want to run a longer stem to make your Oldschoo...
View full detailsProfile USBB/American fit bottom bracket for 22mm spindle cranks. Great for the re-issue GT power Series Alloy cranks. Available in Colours
• CNC machined from aircraft quality billet 6061 aluminium plate. • 4 bolt design. • 104mm BCD bolt pattern. • Made in USA. Weights: • 34t: 57g/2....
View full detailsSuper light Profile Slim Jim 31.8mm seat clamp for alloy BMX race frames and any other frame that takes a 31.8mm clamp. Made in USA. • 31.8mm insid...
View full detailsSet of 6 Profile Racing Stem Bolts. It's still an SAE thread, but the heads are now take a 6mm allen key. The bolt heads are 11.8mm across. Fits al...
View full detailsPlease note the new design uses one long black bolt that screws Into an alloy lower part. Once attatched to the bike it is not visually different. ...
View full detailsAfter months of testing and anticipation, the Profile Elite Freewheel has been released. -140 points of engagement -Two Fully Sealed Bearings -Har...
View full detailsCentre spacer for all 19mm spindle cranks.
For older style Profile Racing cranks that have the smaller solid style spindles. Usually these cranks have bolt ends rather than Allen key ends.
Profile Spline drive sprockets to fit any 48 spline 19mm spindle and removes the need for a sprocket bolt attatching it to the crank arm. Less bol...
View full detailsOriginally produced in the early 80's, Profile's retro re-Issue Lockjaw Wedge stem is available now. Now with a laser etched logo so as not to be c...
View full details• After many requests, Profile Racing have finally designed and created both a 14mm RHD and LHD version of the Elite hub. • Same Elite hub s...
View full detailsProfile Bearing Kit for Front or Rear Race, SS, Mini, Elite, Totem and Mini Lite hubshells only. Does NOT include driver bearings 2 x bearings incl...
View full details• Kit comprises: Two Profile Spanish BB bearings, Gold spacer, 2 coloured bearings covers/spacers. • For use with 19mm crank spindles only . • Ple...
View full details• This is a conversion kit for Mini, Totem, and Madera V2 Cassette from the 3/8" (10mm) 3 piece axle to the 14mm Gun Drilled Hollow axle....
View full detailsThis is a conversion kit for riders who previously had a Profile Mini hub with a 14mm axle who now want the lightness of our aluminum center axle...
View full detailsTitanium Profile Spider bolt for Profile or Madera cranks ONLY.
Fits Profile Hubshells (NOT drivers) and some others: 17MM ID x 30MM OD x 7MM W)For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic...
View full details• Available in 170mm, 172mm, 175mm, 177mm, 180mm, and 182mm • These Cranks are the stiffest Profile have ever made, with oversized, gusse...
View full details• Genuine Profile crank installation/removal tool. • ONLY Fits solid Profile Elite Cranksets
Made in USA, these Profile Race are the cranks that all other cranks are judged by. 48 splines. 19mm Gun Drill Hollow spindle. Available in 5mm len...
View full detailsThe newest addition to Profile Racing's quality line of BMX hubs has arrived. The Profile Elite 20mm Front Hub is manufactured from a higher gra...
View full details• Manufactured at Profile Racing’s U.S.A. plant using aerospace grade titanium (stronger than chromoly). • FIts Profile Mini and Totem cassette h...
View full details• Tubular welded CrMo crank arms are available in more colours and sizes than any other crankset. • New! Gun Drilled Hollow BB Spindle. Solid Ti ...
View full detailsGenuine replacement Front Axle for Mini/Totem/Elite hubs a Available in Cromo steel or Aluminium. Made in USA.
Replacement aluminium centre axle for Profile Racing Mini and Totem rear cassette hubs. Axle only, but we do also sell this as a complete axle k...
View full detailsProfile Elite 9t Cromo driver Fits Profile Elite hubs only RHD. Does NOT include springs and pawls (sold separately)
Profile Racing designed Nomad Hubs to best compliment the Profile Elite Freewheel. The hub shell is the same style as Profile’s Elite hubs, so an...
View full detailsDo you have Profile Column Cranks? Need a crank tool? This one will work. This tool is very specific, so if you have a different set of cranks, it'...
View full detailsClassic SS ("Super Strong") hub made in USA. 36H. Left hand drive. Full Titanium upgrade: Ti 14mm axle, Ti 11T driver. Use with 30T front sprocket...
View full details5 5/8" Ti Spindle only 5.4oz (153g) (vs 8.4oz (240g) for CrMo) including bolts and washers. 6" Ti only 5.7oz (160g) (vs.9.9oz (280g) for CrMo inclu...
View full details• Replacement left hand genuine Profile crank arms. • Not left hand drive. • Made in USA. • Fits all 19mm 48 spline spindles. • Available in ...
View full details• Choose GDH for new hollow spindles, choose solid if your spindle is, er, solid. • Made from 6AL4V titanium. • Normal aluminum washers. •...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions