If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The Profile Racing Euro threaded Euro BB ncludes LH & RH threaded cups, bearings (4), tube spacer, cone spacers (2), & aluminium spacers. ...
View full details
Profile Racing, made in USA, slim super-light seatclamp in 28.6mm ID. • 28.6mm diameter. For steel frames that use a 25.4mm seatpost (most modern ...
View full details
• CNC machined from aircraft quality billet 6061 aluminium plate. • 4 bolt design. • 104mm BCD bolt pattern. • Made in USA. Weights: • 34t: 57g/2....
View full details
Profile Racing's Old-Style BMX Spider is now available again. 5 arm 110BCD so fits old Sugino, SR & SunTour chainrings as well as our new Mirag...
View full details
Please note the new design uses one long black bolt that screws Into an alloy lower part. Once attatched to the bike it is not visually different. ...
View full details
After months of testing and anticipation, the Profile Elite Freewheel has been released. -140 points of engagement -Two Fully Sealed Bearings -Har...
View full details
For older style Profile Racing cranks that have the smaller solid style spindles. Usually these cranks have bolt ends rather than Allen key ends.
Profile Racing bolt on style spider is for use with all 19mm spindle cranks with a standard sprocket bolt in either 4 or 5 arm pattern in high poli...
View full details
Profile Spline drive sprockets to fit any 48 spline 19mm spindle and removes the need for a sprocket bolt attatching it to the crank arm. Less bol...
View full details
• If your driver is tight on your profile hub then this washer will fix your issue. It spaces the driver out from the bearing in the hubshell givin...
View full details
• Made in the USA. • Sold in Pairs (Right and Left) and include 2 tensioners, 4 bolts, and 4 nuts. • For use with 3/8″(10mm) axles only. • Colo...
View full details
One of best-selling pivpotal seats medium padding suit mosts tastes! Now comes in a ton of colours. P-wing logo embroidery. • Kevlar base. • Medi...
View full details
• Back in 09, Profile Racing introduced the product that revolutionised all current methods of holding your wheel onto your bicycle. It's the Pr...
View full details
Super light Profile Slim Jim 31.8mm seat clamp for alloy BMX race frames and any other frame that takes a 31.8mm clamp. Made in USA. • 31.8mm insid...
View full details
Set of 6 Profile Racing Stem Bolts. It's still an SAE thread, but the heads are now take a 6mm allen key. The bolt heads are 11.8mm across. Fits al...
View full details
• Material: 7075 Aluminum. • Rear: 3/8 (10mm) or 14mm (replaces cone spacer and on 14mm no jam nut). • Works with: Profile Mini and Totem hu...
View full details
Profile Racing Galaxy 22mm spline drive sprocket, Madein USA of course. • Only fits 48-spline 22mm spindles. • 25 and 28T sizes. • Available in re...
View full details
We can now offer female (bolt) Profile Mini hubs with all the different bolt options. As well as a choice of 9 to 18T driver options. 9, 10, 11T ar...
View full details
The Profile Racing Mid Bottom Bracket Kit comprises: Two Profile American BB bearings without cups - can also be used as replacement bearings in an...
View full details
Genuine Profile Racing Aegis front hubguard that fits Profile Mini and Totem hubs. Madera BMX hubs. • Material: 7075 Aluminum. • Front: 3/8 (10mm) ...
View full details
Awesome vintage re-pop original Profile Racing logo (Circa early 80’s) in patch form. -Made in the USA. -Sold as a single patch.
Originally produced in the early 80's, Profile's retro re-Issue Lockjaw Wedge stem is available now. Now with a laser etched logo so as not to be c...
View full details
• Shafted Profile Racing stem. • Fits Oldschool bikes with 1 inch threaded forks. • Great if you want to run a longer stem to make your Oldschoo...
View full details
Profile USBB/American fit bottom bracket for 22mm spindle cranks. Great for the re-issue GT power Series Alloy cranks. Available in Colours
Opening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
