Profile Racing Retro Crank Spider Silver
Profile Racing's Old-Style BMX Spider is now available again. 5 arm 110BCD so fits old Sugino, SR & SunTour chainrings as well as our new Mirag...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Profile Racing's Old-Style BMX Spider is now available again. 5 arm 110BCD so fits old Sugino, SR & SunTour chainrings as well as our new Mirag...
View full details• CNC machined from aircraft quality billet 6061 aluminium plate. • 4 bolt design. • 104mm BCD bolt pattern. • Made in USA. Weights: • 34t: 57g/2....
View full detailsPlease note the new design uses one long black bolt that screws Into an alloy lower part. Once attatched to the bike it is not visually different. ...
View full detailsAfter months of testing and anticipation, the Profile Elite Freewheel has been released. -140 points of engagement -Two Fully Sealed Bearings -Har...
View full detailsFor older style Profile Racing cranks that have the smaller solid style spindles. Usually these cranks have bolt ends rather than Allen key ends.
• If your driver is tight on your profile hub then this washer will fix your issue. It spaces the driver out from the bearing in the hubshell givin...
View full detailsProfile Spline drive sprockets to fit any 48 spline 19mm spindle and removes the need for a sprocket bolt attatching it to the crank arm. Less bol...
View full details• Now comes with coloured bearing covers/spacers just the US Hop Up kits. • Kit comprises: Two Profile American BB bearings without cups - can als...
View full details• Material: 7075 Aluminum. • Rear: 3/8 (10mm) or 14mm (replaces cone spacer and on 14mm no jam nut). • Works with: Profile Mini and Totem hu...
View full detailsThe Profile Racing Mid Bottom Bracket Kit comprises: Two Profile American BB bearings without cups - can also be used as replacement bearings in an...
View full detailsGenuine Profile Racing Aegis front hubguard that fits Profile Mini and Totem hubs. Madera BMX hubs. • Material: 7075 Aluminum. • Front: 3/8 (10mm) ...
View full detailsPLEASE NOTE: This is for the REAR HUB only. Profile Elite Hubs are now available. They feature the Ultradriver, the first all-ne...
View full detailsAwesome vintage re-pop original Profile Racing logo (Circa early 80’s) in patch form. -Made in the USA. -Sold as a single patch.
One of best-selling pivpotal seats medium padding suit mosts tastes! Now comes in a ton of colours. P-wing logo embroidery. • Kevlar base. • Medi...
View full details• Back in 09, Profile Racing introduced the product that revolutionised all current methods of holding your wheel onto your bicycle. It's the Pr...
View full details• Shafted Profile Racing stem. • Fits Oldschool bikes with 1 inch threaded forks. • Great if you want to run a longer stem to make your Oldschoo...
View full detailsProfile USBB/American fit bottom bracket for 22mm spindle cranks. Great for the re-issue GT power Series Alloy cranks. Available in Colours
Centre spacer for all 19mm spindle cranks.
Profile Racing Galaxy 22mm spline drive sprocket, Madein USA of course. • Only fits 48-spline 22mm spindles. • 25 and 28T sizes. • Available in re...
View full detailsFor those running a freewheel, we now offer these matching pair of Profile Racing hubs - Nomad rear and Elite front. High quality hubs that you co...
View full detailsWe can now offer female (bolt) Profile Mini hubs with all the different bolt options. As well as a choice of 9 to 18T driver options. 9, 10, 11T ar...
View full detailsOriginally produced in the early 80's, Profile's retro re-Issue Lockjaw Wedge stem is available now. Now with a laser etched logo so as not to be c...
View full detailsSuper light Profile Slim Jim 31.8mm seat clamp for alloy BMX race frames and any other frame that takes a 31.8mm clamp. Made in USA. • 31.8mm insid...
View full detailsSet of 6 Profile Racing Stem Bolts. It's still an SAE thread, but the heads are now take a 6mm allen key. The bolt heads are 11.8mm across. Fits al...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions