ODI Longneck Pro Flangeless Grips
ODI's best selling grips of all time now comes in Flangeless design - and it's softer too! These grips are widely regarded as the best in the busin...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
ODI's best selling grips of all time now comes in Flangeless design - and it's softer too! These grips are widely regarded as the best in the busin...
View full detailsThe classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThese miniature versions of ODI's classic Longneck Grips are made from the same materials as their full-sized counterparts and are available in 8 d...
View full detailsThe classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsThere simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full details• Genuine Dia-Compe BRS brake cable.• Die extruded 'slick' inner & low friction teflon lined outer. • Black. • Front or Rear. NOTE: Order a rea...
View full details• 4-Jeri brand single speed screw-on freewheel. • Chrome. • 1/2 x 1/8" (uses 1/8" chain). • 16, 17 or 18T (for large thread hubs). • 2 paw...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsRenowned Nutrak quality and value Welded butyl rubber construction is robust yet lightweight Schrader Car Type Valve Be careful when selecting Fra...
View full detailsThese genuine made-in-USA ODI Mushroom Grips feature the same ergonomic ribbed design as they did when we sold them 40+ years ago. The collapsable ...
View full detailsPlated seat guts for your railed seat similar to the ones that Kashimax made in the 1980's. Bit of a faff to fit, but they always were ;) If you ar...
View full detailsHere's what Cult Crew had to say: "After wearing Vans for most of our lives, we wanted to see if the Vans waffle pattern would work as well with ou...
View full detailsThe definitive book on the history of BMX in the UK in the 80's, told by the kids that lived it. This isn't just another BMX book, it is the bible ...
View full detailsDarxide One piece crank, great for any old school BMX resto that uses the (large) American bottom bracket ie/ Raleigh Burner, Mongoose, Redline, GT...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsHave a seat and take a cruise or raise it up with the crew with the super comfortable SE Bikes Flyer fat seat, which keeps your booty in place. Th...
View full detailsGenuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full details• Chrome finish - looks good on modern or oldschool bikes - very similar in looks to the original (and best!) Chrome Suntour freewheels. • RHD only...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsBox Phase 1 number plate comes with Custom ALANSBMX team logo + your name and numbers AND AGE GROUP if required - made by us to fit this number pla...
View full detailsOur best-selling brake cable from Odyssey available in black, blue, white red in standard 1.5mm diameter with a Teflon lining for smooth operation....
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsCR-MO chainring bolts High quality Cr-Mo steel. Chrome plated. Single 6.5mm - also available in Double or Triple (XL) Set of 5
ODI took our best selling grip - the Longneck Pro - and have made it even better with the new longer and softer Longneck SLX. New longer 160mm len...
View full detailsThe A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full detailsSkyway Tuff Wheel 3/8" axle nuts in coarse (24tpi) or regular (26tpi) pitch. Old Skyways use 24tpi, modern Skyways can use either. Can also be used...
View full detailsVelo VL-117 Kashimax-style Old School "Aero" BMX Seat as used by most bikes from the last 70's right into the 90's with silver plated seat guts in...
View full detailsThe grip of choice for our Robinson and Torker UK race team back in the 80’s, the A’ME Tri grip is now available again, made in USA just like it al...
View full detailsDating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full detailsRenowned Nutrak quality and value Welded butyl rubber construction is robust yet lightweight Presta Racing Type Valve 48mm long (Unless LV) LV is ...
View full detailsThe Odyssey MPEGs replace the popular GI pegs and are our most popular set of pegs, sold as a pair in Black or Chrome and they fit 10 or 14mm axle...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsAvoid damaged freehubs with these precision CNC machined Cr-mo HG style sprockets with an offset 7mm wide foot to avoid digging into softer alloy...
View full detailsThe Longneck has been our best-selling grip of the last ten years and it's genes can be traced back to the original ODI Mushroom grip of the early ...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions