If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Bossless crank arms for Spline drive use only • Tubular welded CrMo crank arms are available in more colours and sizes than any other crankset. • ...
View full details
A HIGH QUALITY AFTERMARKET ALLOY TOP BOLT DESIGNED TO FIT THE UTOPIA AND ALL WETHEPEOPLE AFTERMARKET FORKS. SQUARE RATCHET INTERFACE TO ALLOW THE U...
View full details
Stranger Ballast Tyre - Bright Green With Black Sidewall 2.45" Following on from Stranger's slick-like Haze tyre, the Ballast is a super grippy, kn...
View full details
Titanium Profile Spider bolt for Profile or Madera cranks ONLY.
Replacement plastic slack helical adjuster for Clutch v1/v2 freecoaster hub. 2 pieces.
The Griplock is Colony's Team designed tyre with a high 110psi pressure rating, and all-round fast-rolling tread pattern and is available in 2.20" ...
View full details
PINK with BLACK sidewall All over tread pattern based off the classic VANS WAFFLE pattern Grippy in all situations High pressu...
View full details
The Hangover crank has had a complete makeover, the H2 versions are lighter and stronger than the previous model. Alex Coleborn along with Mark ...
View full details
Machined alloy 6061 T-6 alloy core with holes for extra lightness 1.2mm wall 4130 chromoly outer sleeve. Lightweight anti-twist hex washers fit 10m...
View full details
Fits Profile Hubshells (NOT drivers) and some others: 17MM ID x 30MM OD x 7MM W)For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic...
View full details
• Available in 170mm, 172mm, 175mm, 177mm, 180mm, and 182mm • These Cranks are the stiffest Profile have ever made, with oversized, gusse...
View full details
• Genuine Profile crank installation/removal tool. • ONLY Fits solid Profile Elite Cranksets
Made in USA, these Profile Race are the cranks that all other cranks are judged by. 48 splines. 19mm Gun Drill Hollow spindle. Available in 5mm len...
View full details
Designed for the 2016 BMX Olympics, the T1-SX is the unfair advantage. Trusted by eleven of the world’s fastest BMX racers in Rio, and bringing...
View full details
The Haro Catapult tyre is a great all-rounder with knurled wide spread tread pattern that gets great traction on trails and hard-packed dirt ...
View full details
FInally, for those craving an all steel BMX race frame, S&M have you covered with the new steel Panther range. Euro BB and sweet steel goodnes...
View full details
BOX has completely revised its range of carbon forks: • A NEW LOGO to recognise them. • THE STEERING PIVOT IS SCREWED on t...
View full details
ETA December 2024/January 2025. The combination of Hutch and John Buultjens was never going to produce a "good enough" complete bike. John, of cour...
View full details
ETA December 2024/January 2025. The combination of Hutch and John Buultjens was never going to result in a "good enough" complete bike. John, of co...
View full details
Large flange sealed bearing hub, front or flip flop rear. Rear accepts 13/14/15 or 16+ tooth freewheel (not included). 36 hole. 3/8" (10mm) axles...
View full details
One size. 80% cotton, 17% polyester, 3% elastane, crew sock with knitted jacquard logo.
Available in Black or White. The Box Two Number Stickers are made from UV-protected, high-strength vinyl that meets or exceeds the Official USABMX/...
View full details
The classic Primo Balance Seat is back. Black with embossed griffin logo on the top panel and a stitched Primo logo on the rear. A new modern tak...
View full details
First Production is only available in Triple Show Chrome Plated and limited qty of 25 pcs worldwide. Matching Pads are available, made exclusivel...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
