Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThe classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsGreat value Salt AM steel pegs, 14mm with 10mm adaptors, 4.15" long, sold as a pair (2) and available in a ton of colours. Material: forged steel S...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsIconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsSprocket Spacer. Spider Adapter. Tophat Washer. No matter what you call it, you probably need it, to make your sprocket fit your BB spindle properl...
View full details• Lightweight, high quality ID Aluminium replacement chainring bolts.• Anodised colours - Blue, Gold, Green, Black, Red or Purple (1/3 the weight ...
View full detailsPerfect for race bikes (with 10mm axles) or old school rides. These also protect your dropouts as well as preventing your wheel from slipping when...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsIconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full detailsThe Shadow Conspiracy Interlock is the original and best half link chain on the market giving you maximum adjustability that is required for today'...
View full detailsUS BB Size for 51mm shells and 19mm crank spindles. Available in a range of colours: Black, bluem gold, red or silver. Includes: 2 x Mid Bearings...
View full detailsClassic made in USA Profile Racing American bottom bracket to fit the large old school bottom bracket fitment and for 19mm 3 piece cranks. • For u...
View full detailsGenuine DiaCompe GRAN COMPE Single speed chainring bolts sold as a pack of 5 in black, blue, gold or red. 6.5mm long for single chainring use.Ligh...
View full detailsKMC Gold single 1/8" speed chain is the "industry standard" BMX chain which has been our best-seller for decades now. It will work equally well on ...
View full detailsNow available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsComes with FREE Custom ALANSBMX team logo + your name and numbers AND AGE GROUP if required - made by us to fit this number plate specifically. Jus...
View full detailsBolt pack from Salt for your axles, stem and valve caps. Material: crmo / alloy Includes: x2 M8x25 stem bolts, x4 M x20 stem bolts x2 3/8" and x2 ...
View full detailsThe Profile Racing Mini Hub has been an industry standard for years now and shows no sign of slowing down. Original design for BMX racing as the mi...
View full details• For that ultimate reduction in rotation mass, or a custom wheelset with added bling. • It is pretty well known that rotating mass offers the b...
View full detailsSealed 1 1/8" integrated headset. Includes 2 bearings, crown race and coloured top spacer. Black, blue, gold, red or silver.
Inspired by a classic design from the 80’s and named after a legendary SoCal BMX track, the SE Bikes Narler stem embodies the true essence of retr...
View full detailsUSA Made Neptune BMX cross style sprocket influenced by the original Redline Flight Crank sprockets of the early 80's. We have used these on quite ...
View full detailsThe Mark Mulville "Push" stem is named after Mark's favourite trails and it's one of the most popular stems we sell. CNC machined from aluminium in...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsWe can now offer female (bolt) Profile Mini hubs with all the different bolt options. As well as a choice of 9 to 18T driver options. 9, 10, 11T ar...
View full details• Alloy old school BMX style chainring.• 130BCD 5 arm design to fit old Takagi, Tioga & Shimano pattern cranks/spiders and powerdiscs. • Ma...
View full detailsThe Oxford cable lock uses a 1.8 metre long, 12mm diameter self-coiling high tensile steel cable with protective vinyl sleeve.Features: Complete ...
View full detailsLightweight, high quality ID Aluminium replacement chainring bolts in 8.,5mm size for double chain rings.• Anodised colours - Blue, Gold, Green, Bl...
View full detailsThe 121 Half Link Chain is heat-treated and engraved with the Primo logo. The half link design makes more precise rear end length adjustment possib...
View full detailsGenuine Nitto old school MX2 BMX stem, super high quality, made in Japan and now available in colours as well as black or silver. See some examples...
View full detailsFinally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full detailsNeptune BMX CNC machined alloy power disc with two sets of holes to fit 130 and 110 BCD 5 arm chainring patterns. US made CNC-machined aluminium in...
View full detailsMaterial: 6061 T6 alloy, cnc finish Size: for 25.4mm seat post frames Color: black, oil slick or high polished Features: simple slim one bolt seat ...
View full detailsThe Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. Included are the two-tone, dual-compound pads that ...
View full detailsThe original Torker stem was ICONIC with it's futuristic 6 bolt design and weight saving bottom angle. It's bar crushing "Barbarian" (some may say)...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions