Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThere simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsCurrently our best-selling grip, Broc Raiford can bunnyhop over a house so it’s only right that he has his own Odyssey signature grips to hold on t...
View full detailsAlloy old school Diamond Back style BMX wheels hand assembled in the UK, these are perfect for an old school BMX resto on a budget, but still look ...
View full detailsGenuine ODI, made in USA, BMX Push-In handlebar Plugs. • Resin plugs that simply push-in to the end of your bar. • Simple cheap and clean. • Fits m...
View full detailsCompletely refined design G3 Gyro detangler brake system from the originators of the Gyro system - Odyssey. Comes complete with gyro unit and cable...
View full detailsAs used by our Alans BMX Race Team, the Tioga Power Block has all the sweet goodness of the PowerBlock S-Spec, but in steel bead with thicker, stro...
View full detailsWhen you think about the iconic BMX brands of the 80's Kashimax is right up there with Skyway, Araya and SunTour. The Aero seat was used by virtual...
View full detailsIconic old-school BMX headset made in Japan by Tange with a bear trap locking mechanism to keep it tight. Chrome plated. The classic Beartrap 2 he...
View full details• Genuine Dia-Compe cable in red or blue made exclusively for ALANS BMX. • Front: 72 mm outer / 58 mm inner cable. • Rear: 118 mm outer / 130 mm ii...
View full detailsIconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full detailsReplacing the crank and bearing on your old school ride? Make it easy with this crank and bottom bracket set from Alans BMX. Darxide 170mm cromo o...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them....
View full detailsThe new Odyssey Pro Integrated headset is designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at al...
View full detailsThe DMR V6 is the newest member of the DMR pedal family. DMR V6 pedals are a Nylon evolution of the newest V12 body design. It has the same concave...
View full detailsRenowned and reliable Shimano quality single speed freewheel, built to the tough standards that BMX riders demand. • Hard-wearing chrome-moly steel...
View full detailsPanaracer lightweight skinwall HP-406 old school BMX freestyle tyre remade from the 1980's by Panaracer in black, blue, red or white, 20x1.75" size...
View full detailsIconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full detailsKriss Kyle's signature grips from BSD. Kriss wanted a grip with a bit more cushion that the Dan Paley Slims and a little longer, he went with a sim...
View full detailsMirage 1/8" Old School BMX chain, coloured plates with silver links just like they were on the 1980's.• Great high quality alternative to DID and ...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions