Dia-Compe MX1500N Hinged Seatclamp
The classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The Dia-Compe name has been in BMX since the very start and at one time probably 90% of riders were using Dia-Compe brake on their bikes. Into the 90's and 2000's Dia-Compe continued to evolved their range of quality products designed for today's riding demands. Eventually Diacompe realised there would be a demand for their classic brakes, so the MX-1000 &MX-890 calipers and Tech-3 & Tech-4 were re-issued and have been a lifeline for those restoring 80's bikes. Dia-Compe also make high quality brakes & headsets for modern freestyle and race bikes as well.
The classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full details• Genuine Dia-Compe BRS brake cable.• Die extruded 'slick' inner & low friction teflon lined outer. • Black. • Front or Rear. NOTE: Order a rea...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsGenuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsDating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsDating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsThe finishing touch for your old school BMX restoration: Genuine DiaCompe silver brake cable clamp to keep your cable in place available in three s...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsGenuine DiaCompe Old School BMX brake cable in red or blue. Dia-Compe printing on the cable outer. Available in Black, Blue, White or Red. Front or...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsThe DiaCompe Hombre is a great upgrade for a bikes using a U-brake and can be run front or rear. • Universal - Fits Front or rear, double or singl...
View full details• Genuine Dia-Compe cable in red or blue made exclusively for ALANS BMX. • Front: 72 mm outer / 58 mm inner cable. • Rear: 118 mm outer / 130 mm ii...
View full detailsGenuine Diacompe "Old school" top tube clamps for your brake cable in black in a choice of 3 sizes to suit your frame. • 25.4, 28.6 or 31.8mm. Y...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsGenuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
DiaCompe have remade the classic Tech 4 (MX123) lever from the 1980's. Available in Left or Right in Black, Blue, Gold, Red, Silver or White. Gre...
View full detailsDiacompe genuine Stainless Steel "Old school" top tube clamps for your brake cable in Blue in sizes 25.5, 28.5 or 31.8mm. • 25.4, 28.6 or 31.8mm. Y...
View full detailsGenuine DiaCompe eplacement spring for the Hombre U-Brake. High quality Japanese steel Sold individually Left (gold) or Right (silver) Hand
Dia-Compe Tech77 "Potts" (182S) with thumb-lock stopper is THE all time classic BMX lever but with a stopper. Sprung loaded "Stopper button" locks ...
View full detailsThe classic DiaCompe AD990 U brake. Universal fit for front or rear. Available in black or silver. • Tweaked version of the classic BMX U-brake. • ...
View full detailsDiaCompe MX1000 brakes are now available as a complete brakeset from Alans BMX with front and rear calipers, a pair of MX122 levers and front and a...
View full detailsGenuine DiaCompe frame cable clamp in gold to keep your brake cable secure to your frame, available in three different sizes. • Stainless Steel "O...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsAdd the finishing touch to your bike with this original-style brake cable clamp by DiaCompe just like the ones that came with MX1000 brakes back in...
View full details• Hollow Star Nut & laser etched CNC alloy Cap. • Set with bolt. • Black 1 1/8"
Genuine complete Dia-Compe MX-1000 or MX-890 Brake Spindle Bolt Kit (and possibly other models too). Fits original and reissue brakes. Replacement ...
View full detailsFinally we have these handy genuine DiaCompe alloy ferrules for Old School BMX brake levers that don't use barrel adjusters ie/ Tech-II, Tech-III,...
View full detailsDiaCompe Tech77 "Potts" (182S) with thumb-lock stopper for freestyle balance tricks. • THE all time classic BMX lever but with a stopper. Sprung l...
View full detailsQuality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions