ODI Longneck Pro Flangeless Grips
ODI's best selling grips of all time now comes in Flangeless design - and it's softer too! These grips are widely regarded as the best in the busin...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
ODI's best selling grips of all time now comes in Flangeless design - and it's softer too! These grips are widely regarded as the best in the busin...
View full detailsThese miniature versions of ODI's classic Longneck Grips are made from the same materials as their full-sized counterparts and are available in 8 d...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsHere's what Cult Crew had to say: "After wearing Vans for most of our lives, we wanted to see if the Vans waffle pattern would work as well with ou...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsOur best-selling brake cable from Odyssey available in black, blue, white red in standard 1.5mm diameter with a Teflon lining for smooth operation....
View full detailsVelo VL-117 Kashimax-style Old School "Aero" BMX Seat as used by most bikes from the last 70's right into the 90's with silver plated seat guts in...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full detailsThe Longneck has been our best-selling grip of the last ten years and it's genes can be traced back to the original ODI Mushroom grip of the early ...
View full detailsThe grip of choice for our Robinson and Torker UK race team back in the 80’s, the A’ME Tri grip is now available again, made in USA just like it al...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsGreat value Salt AM steel pegs, 14mm with 10mm adaptors, 4.15" long, sold as a pair (2) and available in a ton of colours. Material: forged steel S...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsPanaracer HP406 old school BMX freestyle tyres sold here as a pair (2) along with 2 quality innertubes. • Lightweight skinwall old school freestyle...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsThe SE Racing Bear Trap pedals offer authentic Old School BMX styling, and a lot of grip and stability. The extra wide “bear trap” cages keep your ...
View full details• Lightweight, high quality ID Aluminium replacement chainring bolts.• Anodised colours - Blue, Gold, Green, Black, Red or Purple (1/3 the weight ...
View full detailsPerfect for race bikes (with 10mm axles) or old school rides. These also protect your dropouts as well as preventing your wheel from slipping when...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsOur Alans BMX Race Team swear by Halo MXF hubs and at a mere 155g the MXF is a super light race hub and yet strong enough for freestyle. Smooth se...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsHere's what Cult Crew had to say: "After wearing Vans for most of our lives, we wanted to see if the Vans waffle pattern would work as well with o...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsCustom Die Cut name sticker x2 for sticking to your toptube down by your seat. 4 inches long and 1/2 tall Up to 9 characters Pleave the name you wa...
View full detailsThe Gusset Sleeper flangless grips give the ODI Longneck Pro a run for their money, in face our team riders prefer these over ODI's. An object tha...
View full detailsHoly 80’s, Batman! Grip donuts are back! Add some style and flair to your ride. While you’re at it, eliminate that thumb abrasion, too. • Made fr...
View full details• Sold as a pair of two. • 9 inches long. • See options for colours available.
Skate board tool - Covers Kingpin, wheels nuts, and truck bolts both phillips and allen headed.
Single File Lock on Grips Our old faithful File Lock grip gets a face lift! The Single File uses a single alloy clamp on the inside to give you mor...
View full detailsUS BB Size for 51mm shells and 19mm crank spindles. Available in a range of colours: Black, bluem gold, red or silver. Includes: 2 x Mid Bearings...
View full detailsBolt pack from Salt for your axles, stem and valve caps. Material: crmo / alloy Includes: x2 M8x25 stem bolts, x4 M x20 stem bolts x2 3/8" and x2 ...
View full detailsMade in the USA from the same company that made them over 40 years ago, A'ME Full Waffle MX style grips are a BMX classic for maximum traction, ava...
View full details• For that ultimate reduction in rotation mass, or a custom wheelset with added bling. • It is pretty well known that rotating mass offers the b...
View full detailsThe legendary Handler by Kashimax, first released in 1987, is back! Made in Japan, just like they always have been. The Kashimax Handler FS featur...
View full detailsThe Gusset Sleeper flanged grips give the ODI Longneck Pro a run for their money, in fact our team riders prefer these over ODI's. An object that ...
View full detailsUSA Made Neptune BMX cross style sprocket influenced by the original Redline Flight Crank sprockets of the early 80's. We have used these on quite ...
View full detailsThe grip of your dreams!Utilising different size diamond knurling top and bottom, and eccentric core to give more padding on the topside and under ...
View full detailsThe Snafu Mobeus has been the Gyro of choice for park riders for years now because it is light weight alloy, super smooth, low maintenance and won'...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsFront or rear Mirage classic BMX cable in black, blue, yellow, white or red. Comes with cable tidy. Ferrule not included for old school lever but ...
View full detailsSealed 1 1/8" integrated headset. Includes 2 bearings, crown race and coloured top spacer. Black, blue, gold, red or silver.
Before the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsWe spent a lot of time with the team discussing everything they wanted in a pedal. The end result is the logic. The larger platform gives your foot...
View full detailsThe éclat Pulsar grip is the end result of a quest for the “perfect” grip. This flangeless mushroom style grip is made in the USA by ODI grips usi...
View full detailsA’ME BMX 1/2 Waffle grips are manufactured in the USA by people who have been involved in the grip industry for over 40 years. A BMX classic especi...
View full detailsWe can now offer female (bolt) Profile Mini hubs with all the different bolt options. As well as a choice of 9 to 18T driver options. 9, 10, 11T ar...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions