![Dia-Compe BMX Racing Black / Front Dia-Compe MX-2 V-Brake](http://alansbmx.com/cdn/shop/products/dia-compe-mx-2-v-brake-black-front-bmx-racing-alansbmx-28656294166626_400x400.jpg?v=1658119191)
Dia-Compe MX-2 V-Brake
Quality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Quality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsBox Two™ Chain Tensioners let you dial in your chain tension so it's just right. Two mounting holes provide room for ample adjustment on most 3/8" ...
View full detailsShimano DX Quality 3/32 cog. So can be used with narrow 3/32 race chains as well as the wider 1/8" single speed chains. • Can be used on new or old...
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full detailsThe new chain is based off the infamous ‘510’ design that has become the standard amongst top riders around the world. This is available in both ...
View full details• For that ultimate reduction in rotation mass, or a custom wheelset with added bling. • It is pretty well known that rotating mass offers the b...
View full detailsAdjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single hole "lollipop" design, these tension...
View full detailsSealed 1 1/8" integrated headset. Includes 2 bearings, crown race and coloured top spacer. Black, blue, gold, red or silver.
The original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsBox One™ Chain Tensioners are extruded then CNC-machined from 7075 aluminium for an optimal balance of strength and weight. A minimalist design add...
View full detailsRetro-American cups and bearings for your Profile Racing 3-Piece Race Style Crank set - comes with flat cups, sealed bearings, tube spacer and alum...
View full detailsTake a step back in time with the Haro Legends sprocket, styled on the original Redline Flight sprocket. 5mm thick 6061 Aluminium 24mm centre hole ...
View full detailsHigh quality Dia-Compe sealed bearing CB-2 Headset is a quality lightweight threadless press-in cup-type ”Aheadset" for regular (not integrated) 1 ...
View full details• Alloy old school BMX style chainring.• 130BCD 5 arm design to fit old Takagi, Tioga & Shimano pattern cranks/spiders and powerdiscs. • Ma...
View full detailsThe Box Three V-brake features 6061-T6 alloy arms, Dual Compound brakepads and two Arm Lengths the new Box Three V-Brakes have all the features you...
View full detailsNew issue Haro Lineage seat post clamp with a Peregrine flavour. Black or silver in 28.6mm to fit modern bikes with 25.4mm seatposts. As fitted to...
View full details• Copy of the Dia-Compe MX-1000 copy brakes; front and rear MX-1000 type calipers with all washers etc. Cables and levers not included, but we do ...
View full detailsThe same as the popular Promax levers, now as Box Three line of products. Flip Flop lever design lets you run these Left or Right sided without is...
View full detailsThe Kool Stop Thinline brake pad was designed for brake systems with tight brake clearance and for easy tyre removal. This pad has a hardened rigid...
View full detailsThe pad that started it all. The Kool Stop INTL salmon brake pad was the first pad produced by Kool Stop and is where they got their name from. Av...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. I always ran this 3/32" back in the day, they fitt...
View full detailsFinally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full detailsETC Seatclamp in Quick Release available in different sizes. Black or Silver Perfect for your Race BMX bike
Opening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions