Haro Fusion DX Alloy Pedals
Haro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Haro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsThe Odyssey 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that Old or Mid School BMX needing a caliper brake. This ...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsSprocket Spacer. Spider Adapter. Tophat Washer. No matter what you call it, you probably need it, to make your sprocket fit your BB spindle properl...
View full detailsGenuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsOur Alans BMX Race Team swear by Halo MXF hubs and at a mere 155g the MXF is a super light race hub and yet strong enough for freestyle. Smooth se...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full details• Left and right Tech-III style Dia-Compe copy brake levers. • Perfect for all 1980's BMX bikes. • Great value. • Black or Silver.
The Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsThe Shadow Conspiracy Interlock is the original and best half link chain on the market giving you maximum adjustability that is required for today'...
View full details• Copy of the Dia-Compe MX-1000 copy brake sets, complete front and rear including left and right Tech-III style levers, front and rear MX-1000 typ...
View full detailsQuality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsThe mid-school classic has been re-released. A seriously grippy and durable pedal with an Alloy body, Steel pins, concave profile and meat tenderi...
View full detailsUS BB Size for 51mm shells and 19mm crank spindles. Available in a range of colours: Black, bluem gold, red or silver. Includes: 2 x Mid Bearings...
View full detailsShimano DX Quality 3/32 cog. So can be used with narrow 3/32 race chains as well as the wider 1/8" single speed chains. • Can be used on new or old...
View full detailsBox Two™ Chain Tensioners let you dial in your chain tension so it's just right. Two mounting holes provide room for ample adjustment on most 3/8" ...
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full details• For that ultimate reduction in rotation mass, or a custom wheelset with added bling. • It is pretty well known that rotating mass offers the b...
View full detailsUSA Made Neptune BMX cross style sprocket influenced by the original Redline Flight Crank sprockets of the early 80's. We have used these on quite ...
View full detailsAdjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single hole "lollipop" design, these tension...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsSealed 1 1/8" integrated headset. Includes 2 bearings, crown race and coloured top spacer. Black, blue, gold, red or silver.
Before the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsHigh quality Dia-Compe sealed bearing CB-2 Headset is a quality lightweight threadless press-in cup-type ”Aheadset" for regular (not integrated) 1 ...
View full detailsBox One™ Chain Tensioners are extruded then CNC-machined from 7075 aluminium for an optimal balance of strength and weight. A minimalist design add...
View full detailsTake a step back in time with the Haro Legends sprocket, styled on the original Redline Flight sprocket. 5mm thick 6061 Aluminium 24mm centre hole ...
View full details• Alloy old school BMX style chainring.• 130BCD 5 arm design to fit old Takagi, Tioga & Shimano pattern cranks/spiders and powerdiscs. • Ma...
View full detailsThe Box Three V-brake features 6061-T6 alloy arms, Dual Compound brakepads and two Arm Lengths the new Box Three V-Brakes have all the features you...
View full detailsNew issue Haro Lineage seat post clamp with a Peregrine flavour. Black or silver in 28.6mm to fit modern bikes with 25.4mm seatposts. As fitted ...
View full detailsGreat quality High quality Wellgo B087U alloy pedals with steel pins for extra grip. 9/16" thread for all 3 piece cranks. Or 1/2" for One Piece Old...
View full details• Copy of the Dia-Compe MX-1000 copy brakes; front and rear MX-1000 type calipers with all washers etc. Cables and levers not included, but we do ...
View full detailsThe same as the popular Promax levers, now as Box Three line of products. Flip Flop lever design lets you run these Left or Right sided without is...
View full detailsThe Kool Stop Thinline brake pad was designed for brake systems with tight brake clearance and for easy tyre removal. This pad has a hardened rigid...
View full detailsThe pad that started it all. The Kool Stop INTL salmon brake pad was the first pad produced by Kool Stop and is where they got their name from. Av...
View full detailsFinally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full detailsETC Seatclamp in Quick Release available in different sizes. Black or Silver Perfect for your Race BMX bike
Lightweight alloy spoke nipples from Vocal BMX. Pack of 40. 16mm long (most are 12mm, these give you more leeway when building). Black, blue, gr...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. I always ran this 3/32" back in the day, they fitt...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions