Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThe classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsThere simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsPlated seat guts for your railed seat similar to the ones that Kashimax made in the 1980's. Bit of a faff to fit, but they always were ;) If you ar...
View full detailsThe definitive book on the history of BMX in the UK in the 80's, told by the kids that lived it. This isn't just another BMX book, it is the bible ...
View full detailsDarxide One piece crank, great for any old school BMX resto that uses the (large) American bottom bracket ie/ Raleigh Burner, Mongoose, Redline, GT...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsGenuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsCR-MO chainring bolts High quality Cr-Mo steel. Chrome plated. Single 6.5mm - also available in Double or Triple (XL) Set of 5
The A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full detailsVelo VL-117 Kashimax-style Old School "Aero" BMX Seat as used by most bikes from the last 70's right into the 90's with silver plated seat guts in...
View full detailsThe grip of choice for our Robinson and Torker UK race team back in the 80’s, the A’ME Tri grip is now available again, made in USA just like it al...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsThe finishing touch for your old school BMX restoration: Genuine DiaCompe silver brake cable clamp to keep your cable in place available in three s...
View full details• Tange MX-2 headset to fit all oldschool BMX bikes with 1 inch threaded forks - including Raleigh Burner, Torker, GT, Haro, Mongoose, Diamond Back...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsAlloy old school Diamond Back style BMX wheels hand assembled in the UK, these are perfect for an old school BMX resto on a budget, but still look ...
View full detailsLittle Vans-shaped brake blocks made by Kool Stop pretty much unchanged since the 80's, these are perfect for your Skyway Tuff Wheels. • With a lo...
View full detailsThe Odyssey 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that Old or Mid School BMX needing a caliper brake or if...
View full detailsLong 15 inch (380mm), chrome plated Oxford/Darxide seat post in 22.2mm (7/8") diameter for your old school BMX bike. • Chrome plated. • 380mm (1...
View full detailsWhen you think about the iconic BMX brands of the 80's Kashimax is right up there with Skyway, Araya and SunTour. The Aero seat was used by virtual...
View full detailsIconic old-school BMX headset made in Japan by Tange with a bear trap locking mechanism to keep it tight. Chrome plated. The classic Beartrap 2 he...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsPanaracer HP406 old school BMX freestyle tyres sold here as a pair (2) along with 2 quality innertubes. • Lightweight skinwall old school freestyle...
View full detailsIconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full detailsReplacing the crank and bearing on your old school ride? Make it easy with this crank and bottom bracket set from Alans BMX. Darxide 170mm cromo o...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions