Tange Seiki Passage 32 Road 1 Inch Threaded Headset
High-tension steelTriple Sealed MechanismChrome Plated or black finish available DOES NOT FIT old school BMX frames with exception* 30.2mm headtube...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
High-tension steelTriple Sealed MechanismChrome Plated or black finish available DOES NOT FIT old school BMX frames with exception* 30.2mm headtube...
View full detailsMade-in-USA S&M Bikes layback seatpost in 7/8" (22.2mm) for most old school bikes. 4130 cro-mo, 14 inches long. 7/8" DIAMETER (22.2mm for old s...
View full detailsPack of 6 new school genuine Haro stickers. Designs may vary.
A'ME brand handlebar ends - either run them with new grips or use them to save a set of original old school grips with damaged ends. The hot set-up...
View full detailsFlite have reproduced officially licensed Kuwahara pads for V-bars, one of the iconic brands of the 80's. If you've been looking for a padset to co...
View full detailsCR-MO chainring bolts High quality Cr-Mo steel. Chrome plated.Double XL Sizing 16mm Set of 5
• High quality stainless steel These are the LONGER 8.5mm bolts as used on double chainsets and some race cranks.
Large flange sealed bearing hub, front or flip flop rear. Rear accepts 13/14/15 or 16+ tooth freewheel (not included). 36 hole. 3/8" (10mm) axles f...
View full detailsA’ME grips are now available again, made in USA just like always and hands down one of the best BMX grips ever made! Upgrade your grip game with b...
View full detailsFirst Production is only available in Triple Show Chrome Plated and limited qty of 25 pcs worldwide, these are currently sold out at Torker. Matchi...
View full detailsClassic 1980's Panaracer "Kanrler Knobby", a legitimate competitor to the Mitsuboshi Comp III. Reproduced in Japan with the original tread pattern ...
View full detailsComp III old school pattern tyre in 20x1.95 width suitable for front or rear use. 20" x 1.95" is perfect for front or rear use.
New old stock original 1980's stem. Perfect for an early 80's build. New but they do have marks from 40 years storage. Chrome plated shaft. VERY ...
View full detailsWe were disappointed when the re-issue Group 1 stems only came with painted top plates. It took us a while, but we finally got around to giving one...
View full detailsOriginal circa 1981 (we havent checked the frame number) Mongoose frame with the correct pinched Tange forks. Built with all new parts. All assembl...
View full detailsAlans BMX have bundled together for you this genuine Dia-Compe brake set in all Black with MX-890 calipers front and rear, left and right Tech-III ...
View full detailsThis beautiful Campagnolo Record 1" threaded headset is extremely light and allows for fast sensitive adjustment. BC 1" x 24tpi Height: 36.5...
View full detailsHigh-end made-in-Japan sealed bearing alloy Tange Seiki headset, NJS approved*. NJS approved model Lightweight and durable with strong aluminium c...
View full detailsCartridge Bearing systemLightweight and strong duraluminum alloy constructionTange Seiki original sized 4T5 Cartridge BearingsFully Sealed Mechanis...
View full detailsThe classic high end alloy Tange-Seiki MX5 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but w...
View full detailsThis genuine Dia-Compe complete front and rear brake set up in Silver is perfect for your Old School BMX restoration. Comprising a pair of MX-890 c...
View full detailsThis genuine Dia-Compe complete front and rear brake set up in Red is perfect for your Old School BMX restoration. Comprising a pair of MX-890 cali...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon, it was a progression from the long-lived MX-1000. Matched up with Tech-IV le...
View full detailsOriginal - not reproduction - new old stock HARO Racing sticker. Yellow die-cut vinyl. 90mm x 120mm. When these are gone, they're gone!
Opening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions