If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
ODI's best selling grips of all time now comes in Flangeless design - and it's softer too! These grips are widely regarded as the best in the busin...
View full details
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full details
These miniature versions of ODI's classic Longneck Grips are made from the same materials as their full-sized counterparts and are available in 8 d...
View full details
There simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full details
Back in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full details
Haro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full details
Here's what Cult Crew had to say: "After wearing Vans for most of our lives, we wanted to see if the Vans waffle pattern would work as well with ou...
View full details
The Slim by Four is a BMX-specific brake pad with a symmetric shape designed for both forwards and backwards braking. A custom inner frame helps to...
View full details
Have a seat and take a cruise or raise it up with the crew with the super comfortable SE Bikes Flyer fat seat, which keeps your booty in place. Th...
View full details
Genuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full details
Classic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full details
Our best-selling brake cable from Odyssey available in black, blue, white red in standard 1.5mm diameter with a Teflon lining for smooth operation....
View full details
The Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full details
The Longneck has been our best-selling grip of the last ten years and it's genes can be traced back to the original ODI Mushroom grip of the early ...
View full details
The Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full details
A more traditional style brake pad from Odyssey, the A-Brake pads come in Black for standard rims and also Clear Soft compound for that extra braki...
View full details
The DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full details
The sealed bearing Odyssey Mid Bottom Bracket is available to fit 19 or 22mm crank spindles and comes in black or limited edition colours. Mid BB...
View full details
The classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full details
DiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full details
Great value Salt AM steel pegs, 14mm with 10mm adaptors, 4.15" long, sold as a pair (2) and available in a ton of colours. Material: forged steel S...
View full details
Little Vans-shaped brake blocks made by Kool Stop pretty much unchanged since the 80's, these are perfect for your Skyway Tuff Wheels. • With a lo...
View full details
Genuine ODI, made in USA, BMX Push-In handlebar Plugs. • Resin plugs that simply push-in to the end of your bar. • Simple cheap and clean. • Fits m...
View full details
Mike Hoder’s signature S&M grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bi...
View full details
Clickster Freewheels : Top quality screw-on Freewheels for the discerning single speed rider that wants super quick pick-up... High strength Cr-Mo...
View full details
The Odyssey 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that Old or Mid School BMX needing a caliper brake. This ...
View full details
• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full details
A pck of 20 high quality genuine Halo black ED Coated 14 plain gauge spokes, with 14 gauge black ED coated brass nipples. Plain gauge offers great...
View full details
The Bluebird Chain from Odyssey uses a standard KMC 510-HX link and plate configuration and includes a KMC Pintle half-link that’s pre-installed a...
View full details
DiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full details
If you are running brakes and you want simplicty then the Ghost Pads from Odyssey are worth checking out for sure. Available in Black, Red, or Clea...
View full details
Panaracer HP406 old school BMX freestyle tyres sold here as a pair (2) along with 2 quality innertubes. • Lightweight skinwall old school freestyle...
View full details
Genuine Odyssey G3 Gyro Lower brake cable, one standard length. We have these in black, white or purple. Standard length lower Gyro cable Include...
View full details
Iconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full details
High performance, strong and reliable BMX chain. Suitable for Old, Mid and New school BMX use! Speed: Single Speed Size: 1/2x1/8" Links: 102 Connec...
View full details
Genuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
Opening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
