Dia-Compe MX1500N Hinged Seatclamp
The classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The Dia-Compe name has been in BMX since the very start and at one time probably 90% of riders were using Dia-Compe brake on their bikes. Into the 90's and 2000's Dia-Compe continued to evolved their range of quality products designed for today's riding demands. Eventually Diacompe realised there would be a demand for their classic brakes, so the MX-1000 &MX-890 calipers and Tech-3 & Tech-4 were re-issued and have been a lifeline for those restoring 80's bikes. Dia-Compe also make high quality brakes & headsets for modern freestyle and race bikes as well.
The classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsGenuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
The classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsQuality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full detailsNow available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsHigh quality Dia-Compe sealed bearing CB-2 Headset is a quality lightweight threadless press-in cup-type ”Aheadset" for regular (not integrated) 1 ...
View full detailsFinally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full detailsGenuine Dia-Compe 46t chain ring for use with 1/2 x 1/8" chain with 130BCD pattern. Specifications Material CNC Alumnium Fitting 5 arm Speed...
View full detailsGreat value quality complete Dia-Compe brake kit for v-brakes for BMX race bikes, "retro" bkes that use v-brakes and mountain bikes and hybrids tha...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon, it was a progression from the long-lived MX-1000. Matched up with Tech-IV le...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions