If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
• Genuine Dia-Compe BRS brake cable.• Die extruded 'slick' inner & low friction teflon lined outer. • Black. • Front or Rear. NOTE: Order a rea...
View full details
DiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full details
Genuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full details
The DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full details
Classic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full details
Dating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full details
The Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full details
Dating from the later 80’s the superior clamp and forged lever of the DiaCompe Tech-77 is a huge improvement over the levers from the previous era....
View full details
The DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full details
The finishing touch for your old school BMX restoration: Genuine DiaCompe silver brake cable clamp to keep your cable in place available in three s...
View full details
DiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full details
Quality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full details
Genuine DiaCompe Old School BMX brake cable in red or blue. Dia-Compe printing on the cable outer. Available in Black, Blue, White or Red. Front or...
View full details
DiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full details
Genuine Diacompe "Old school" top tube clamps for your brake cable in black in a choice of 3 sizes to suit your frame. • 25.4, 28.6 or 31.8mm. Y...
View full details
Genuine Dia-Compe Aheadset spacer available in 1 1 /8" in black, blue, white, green, gold, red or silver and 2mm, 5mm and 10mm. 1 1/8" 2, 5, 10mm
DiaCompe have remade the classic Tech 4 (MX123) lever from the 1980's. Available in Left or Right in Black, Blue, Gold, Red, Silver or White. Grea...
View full details
Diacompe genuine Stainless Steel "Old school" top tube clamps for your brake cable in Blue in sizes 25.5, 28.5 or 31.8mm. • 25.4, 28.6 or 31.8mm. Y...
View full details
Genuine DiaCompe eplacement spring for the Hombre U-Brake. High quality Japanese steel Sold individually Left (gold) or Right (silver) Hand
Dia-Compe Tech77 "Potts" (182S) with thumb-lock stopper is THE all time classic BMX lever but with a stopper. Sprung loaded "Stopper button" locks ...
View full details
Genuine DiaCompe frame cable clamp in gold to keep your brake cable secure to your frame, available in three different sizes. • Stainless Steel "O...
View full details
The classic DiaCompe AD990 U brake. Universal fit for front or rear. Available in black or silver. • Tweaked version of the classic BMX U-brake. • ...
View full details
Add the finishing touch to your bike with this original-style brake cable clamp by DiaCompe just like the ones that came with MX1000 brakes back in...
View full details
Genuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full details
Genuine complete Dia-Compe MX-1000 or MX-890 Brake Spindle Bolt Kit (and possibly other models too). Fits original and reissue brakes. Replacement ...
View full details
Finally we have these handy genuine DiaCompe alloy ferrules for Old School BMX brake levers that don't use barrel adjusters ie/ Tech-II, Tech-III,...
View full details
2mm (tough) single ended genuine DiaCompe straddle cable with large easy grab nipple. • Designed for U-brakes. • 300mm long. • Price is for ONE ...
View full details
DiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe here in white in front or rear. Now wi...
View full details
Quality DiaCompe MX-2 Lo-Pro V type brake available in black, polished silver or red. Matching MX-2 lever available. • Cold forged, dual spring a...
View full details
Replacement genuine Diacompe M8 size brake lever barrel adjuster with locknut. Price is for one adjuster. • Genuine Dia-Compe. • M8 size. • Price...
View full details
Genuine Genuine Dia-Compe M6 thread barrel adjuster for Tech-V (and selected other) brake levers. Sold individually. • Replacement barrel adjuster...
View full details
Genuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full details
DiaCompe MX-2 Cold forged alloy 2-finger lever blades with adjustable leverage (fits Canti or V brakes). Sold left or right in black, red or silver...
View full details
If you have an old school frame with a flat brake bridge like a Raleigh Burner, Robinson, Torker, etc (rather than a tubular one) instead than usin...
View full details
Great value, entry level Dia-Compe MX110 2-finger style levers from the BMX brake masters, sold as a pair. Features: Robust design. Lightweight a...
View full details
• MX-2 - Cold forged alloy 2-finger lever blades with adjustable leverage (for use wit Canti or V-brakes). • Cast alloy bracket to fi...
View full details
Dia-Compe have remade the old type brown brake blocks that originally came on MX-1000, MX900, MX890, MX1020, etc caliper brakes! Sold as a pair. T...
View full details
The original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full details
DiaCompe MX2 Cold forged alloy 2-finger lever blades with adjustable leverage for Canti or V-brakes. Left or Right. • Cast alloy bracket to fit s...
View full details
Genuine Dia-Compe M7 size barrel adjuster for Tech-77 (and selected other) brake levers. • Replacement barrel adjuster.• Genuine Dia-Compe.• M7 si...
View full details
Before the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full details
Replacement spare for Dia-Compe AD990 Sold in singlesLeft Spring Gold Right Spring Silver
Replacement genuine DiaCompe alloy brake lever barrel adjuster, M10 size. Sold individually. • Genuine Dia-Compe. • M10 size. • For Dia-Compe MX...
View full details
High quality Dia-Compe sealed bearing CB-2 Headset is a quality lightweight threadless press-in cup-type ”Aheadset" for regular (not integrated) 1 ...
View full details
Replacement cable clamp for AD990 HB Dia-Compe brakes.
Dia-Compe Alloy Ahead Cap & Star Nut Set Regular Steel Star Nut & laser etched CNC alloy Cap. Set with bolt. Black 11/8"
Dia-Compe Brake Lever Hoods Soft rubber cover Fits Diacompe 204/202 drop brake levers
• For Dia-Compe Hombre U-brakes - and all other U-brakes pretty much except AD990because they use the studded type. • Soft BMX brake pads. • ...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
