If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full details
There simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full details
Haro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full details
Genuine Dia-Compe BRS brake cable with printed DiaCompe logos on each cable, sold here as a pair front and rear in black, white, red or blue. Perfe...
View full details
The Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full details
The A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full details
The Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full details
The grip of choice for our Robinson and Torker UK race team back in the 80’s, the A’ME Tri grip is now available again, made in USA just like it al...
View full details
The classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full details
DiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full details
When you think about the iconic BMX brands of the 80's Kashimax is right up there with Skyway, Araya and SunTour. The Aero seat was used by virtual...
View full details
• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full details
New Haro HPF tyres, which will hold up-to 100psi – it’s been 30+ years since Haro originally made these beauties, but we’re happy to reintroduce th...
View full details
Panaracer HP406 old school BMX freestyle tyres sold here as a pair (2) along with 2 quality innertubes. • Lightweight skinwall old school freestyle...
View full details
Iconic design 1980's alloy seatclamp to fit modern freestyle bikes. • Standard 28.6mm ID for use with 25.4 seatpost on cro-mo frames - so most m...
View full details
• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full details
The classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full details
• Lightweight, high quality ID Aluminium replacement chainring bolts.• Anodised colours - Blue, Gold, Green, Black, Red or Purple (1/3 the weight ...
View full details
Panaracer lightweight skinwall HP-406 old school BMX freestyle tyre remade from the 1980's by Panaracer in black, blue, red or white, 20x1.75" size...
View full details
On the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full details
For the first time ever, we have available the 6 spoke Skyway Tuff Wheels! Like the 5 spoke versions these are made in USA and now come with sealed...
View full details
Genuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full details
Iconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full details
The Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full details
AME Cam BMX grips are an old school BMX classic. For those in the know, A'ME were the grips of choice for the majority of the Pro's back in the 80...
View full details
• Sold as a pair of two. • 9 inches long. • See options for colours available.
Skyway recreated the iconic alloy riveted flange design of the early 80's Tuff II Wheels with upgraded modern sealed bearings to give a classic loo...
View full details
Genuine DiaCompe GRAN COMPE Single speed chainring bolts sold as a pack of 5 in black, blue, gold or red. 6.5mm long for single chainring use.Ligh...
View full details
Made in the USA from the same company that made them over 40 years ago, A'ME Full Waffle MX style grips are a BMX classic for maximum traction, ava...
View full details
Skyway have recreated the iconic Gold alloy riveted flange design of the early 80's Tuff II Wheels with with upgraded modern sealed bearings to giv...
View full details
7 spoke 24 inch versions of the legendary Skyway Tuff Wheels available in black, blue, red, white or yellow with sealed bearings for your 24" Old ...
View full details
The original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full details
Beautifully made genuine Haro precision CNC machined 6061 T6 alloy construction screw-on axle pegs. Add the final touch to your vintage freestyle ...
View full details
A’ME BMX 1/2 Waffle grips are manufactured in the USA by people who have been involved in the grip industry for over 40 years. A BMX classic especi...
View full details
• Alloy old school BMX style chainring.• 130BCD 5 arm design to fit old Takagi, Tioga & Shimano pattern cranks/spiders and powerdiscs. • Ma...
View full details
Lightweight, high quality ID Aluminium replacement chainring bolts in 8.,5mm size for double chain rings.• Anodised colours - Blue, Gold, Green, Bl...
View full details
The Kenda K50 is an original old school tyre with the tread from the Mitsuboshi Comp III. Sold as a pair with two inner tubes As fitted as original...
View full details
The pad that started it all. The Kool Stop INTL pad was the first pad produced by Kool Stop and is where they got their name from. Sold in pairs (...
View full details
The MCS 5-Bolt chainring is made from 3mm thick machined aluminum and features both a 110mm and 130mm bolt pattern on 36T and larger sizes. Fits 3...
View full details
Now Kashimax is bringing back the saddle which upon release in 1984, continued the successes if the Aero and MX-C models. Styled for racing and ...
View full details
The pad that started it all. The Kool Stop INTL salmon brake pad was the first pad produced by Kool Stop and is where they got their name from. Av...
View full details
Finally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full details
Replacing the drivetrain on your old school ride? Make it easy with this crank, bottom bracket and Haro pedal kit from Alans BMX. Works perfectly w...
View full details
The original BMX pad company who made the pads on our Robinson Team bikes back in 1981. Still produced by hand in USA, these vinyl snap plain pad ...
View full details
The A'ME Mini the based on legendary A'ME Round grip - one of our best selling grips for us back of 1980’s and rejoice, they are still making them,...
View full details
The famous A’ME Triangle is on the end of one of the most popular BMX Grips of the 1980’s. A’ME is proud to introduce the 702 Grips to the BMX mar...
View full details
Replacing the drivetrain on your old school ride? Make it easy with this crank, bottom bracket and MKS pedal kit from Alans BMX. Works perfectly wi...
View full details
Radical Rick is back again! The iconic BMX Plus comic star is the guest of honour on this new pad set from Flite. Retro-modern nylon construction ...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
