Dia-Compe MX1000 Rear Brake
DiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
DiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe here in white in front or rear. Now wi...
View full detailsDiacompe DC 988 Cold forged low profile with dual spring adjust.Great for CX bikes and 90's BMX race bikes that used Cantis for a short while. Fits...
View full detailsDia-Compe 750 Centre Pull Brake as used on 1988 GT Performer, Kuwahara KZ-2, etc. Fits on the frame brake bridge where a regular caliper would, s...
View full detailsClassic old school Dia-Compe DC-810 brake caliper. Shorter reach than an MX890. • Cold forged aluminium arms • Silver Anodised • Drop : 61mm...
View full detailsCLASSIC DC730 * Cold forged aluminum arms * Silver Anodized * Dimension : 53mm-71mm * MX1000 PAD * 164g/wheel
Shorter reach Dia-Compe classic DC730 with the MX1000 brake pad. For use with road application and old BMX frames that run 1 3/8" rims. * Cold fo...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon, it was a progression from the long-lived MX-1000. Matched up with Tech-IV le...
View full detailsHigh-end Dia-Compe Canti brake suitable for fitment on 90's race bikes before v-brakes came out. Classic style Cantilever brake Wide Body Design In...
View full detailsBeautiful retro-styled slimline DC980 Canti-brakes with modern style angle adjustable nutted pads. Used on 90's race bikes before v-brakes came out...
View full detailsThe DC810 brake caliper from Dia-Compe is the shorter reach version of the MX890. Available in silver only, front or rear. • Cold forged alumin...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions