S&M Bikes Elevenz Bars
Turn it up to 11 with the S&M BIkes Elevenz bars! These are a whopping 11 inch rise with a 30 inch width. Made in USA from 4130 cr-mo. Are y...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Founded mid 1987 by friends Greg “Scott” Swingrover and Chris “Mad Dog” Moeller, S&M Bikes was created to craft BMX bikes that could handle the use and abuse the founders and their friends were dishing out.
For more than two decadent decades since, Moeller has steered the S&M ship through hell and high water. Crazy nights, ideas and antics aside, the goal at S&M has always been the same: to make good bikes and run things their way. With American flags and middle fingers waving in the wind, S&M will continue to sail the seas of BMX cheese until other companies make bikes as good as theirs or it’s not fun anymore. Neither of which looks likely to happen soon.
Here at Alans BMX we carry everything we can from S&M, surely the brand that defines "legit" brands. No compromises. From frames and forks to patches and beer coolers, we're your No.1 source for S&M Bikes.
Turn it up to 11 with the S&M BIkes Elevenz bars! These are a whopping 11 inch rise with a 30 inch width. Made in USA from 4130 cr-mo. Are y...
View full detailsS&M Bikes Perfect 10 Bars were made with big men in mind (N/H) and may be for the people who are trying to compensate for their inferiority. ...
View full detailsTeam Credence wanted to tweak the classic S&M BIkes Challenger stem to suit their brand of riding. The result is the Turtleneck – a 6061 T-6 al...
View full detailsThe S&M Bikes Credence and Credence XL bars have a smaller diameter crossbar so will pass an Old School bar if that’s what you’re looking for...
View full detailsThe S&M Bikes Redneck FLT flatland specific version of the most popular BMX stem ever. Made in USAGrade 8 Allen head hardwareOnly 217g (7.65 o...
View full detailsLadies and gentlemen, THE most iconic handlebars in all of BMX, the S&M Slam Bar. Copied the world over and yes bars have gotten bigger again o...
View full detailsThe Challenger stem from S&M is back friends... and yes, it’s exactly the same as the original. So obviously, this hunk of awesome is much too...
View full detailsThe small crossbar on these S&M Bikes Credence handlebars and 8.7" rise makes it just a relevant to an Oldschool build as it does on a up-to-th...
View full detailsRetro cruiser look bars with modern geometry. Add some style to your cruiser with these rad new 7" rise bars from S&M. Made in USA of course! R...
View full detailsIf you liked the S&M Mike Hoder bars, but wish they were a bit higher... here you have the Hoder High bars! Same comfortable/strong design as t...
View full detailsThe Hoder Sky High Bar from S&M with a 9.5 inch rise and madn-size 31 inch width, just in case the Hoder and Hoder High bars don’t get you high...
View full detailsThe S&M Eduro V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single cap ...
View full detailsS&M's Made in USA 4 piece cro-mo bars pay homage to the 80’s and the glory days of cruiser racing! With modern materials and timeless geometry,...
View full detailsThe all new 12 Step Bar from S&M features a 12" rise and is perfect for all those taller riders out there or any one looking to step it up in t...
View full detailsLooking for a solid 10 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a f...
View full detailsOG S&M Bikes Slam Bars, a classic, still made in USA like they always were. These come with orginal Slam and Shield stickers, 8" x 28", chrome....
View full detailsRide Dave Krone's wave with his new signature bar for 2022. About Ordering:Stock in store and at the UK warehouse is displayed. If there is no stoc...
View full detailsBrand new from S&M - The Hoder Super High Bars! Featuring a big box design, straight guage 0.83 wall 4130 tubing and dual radius bends for incr...
View full detailsAwesome retro beach cruiser style S&M 6 Inch rise SAC (Sick Ass Cruiser) crossbar-less handlebars in black or chrome. Made in USA like all S&am...
View full detailsIf you after switching to 4 piece bars, then check out these Fu-Bars from S&M, with a 9 inch rise and 29 inches wide. Straight gauge 4130 tubin...
View full detailsS&M 5 inch cruiser race bars, 29 inches wide in black or chrome. USA made of course. Rise: 5" Width: 29" Up Sweep: 2° Back Sweep: 10° Cross B...
View full detailsThe S&M ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single ca...
View full detailsThe S&M ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single ca...
View full detailsLooking for a solid 10.5 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions